Ge Dishwasher Error I60

⚡ Quick Answer: The GE Dishwasher I60 error indicates a potential issue with the drain pump, possibly resulting in unusual noises or failure to drain water effectivel... ⚠️ Difficulty Varies

What Does Error I60 Mean?

The GE Dishwasher I60 error indicates a potential issue with the drain pump, possibly resulting in unusual noises or failure to drain water effectively. If the error persists, it may suggest internal malfunctions requiring further investigation.

Possible Causes

  • Drain Pump
  • Control Board
  • Wiring Issues

How to Fix Error I60

DIY Fix Verify the error code display and model compatibility

  1. Double‑check the model number of your GE dishwasher and confirm the exact characters displayed.
  2. Consult your specific model’s user manual or label in/behind the dishwasher door for documented error codes.

DIY Fix Perform a basic reset of the dishwasher

  1. Turn off the dishwasher at the circuit breaker or unplug it for 1–2 minutes.
  2. Restore power and attempt to run a normal cycle.

Technician Only Run the dishwasher’s built‑in diagnostic mode and capture any stored codes

  1. Enter diagnostic mode on the GE dishwasher using the correct button combination.
  2. Record any error codes or flashing sequences shown in diagnostics and compare against the official GE code list.
  3. Use service documentation to interpret codes and test associated components (sensors, valves, heaters) as required.
🛑 When to Call a Pro:
  • If after resetting and diagnostic checks the dishwasher still disables operation or shows persistent unknown codes.
  • If multidisciplinary diagnostic codes point to internal failures (especially in temperature sensing or control board) and you are not trained in appliance repair.

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-20 ohms
part_number WD19X10018
voltage_rating 120V AC

Common Questions

What does I60 error mean on GE Dishwasher?

The I60 error may signal a malfunction in the drain pump, leading to drainage issues.

Can I fix GE Dishwasher I60 error myself?

Yes, you can verify the error code, reset the dishwasher, and consult the user manual for further guidance.

How much does it cost to fix I60 error?

Repair costs vary depending on your model and region, so it's best to get a local estimate.

When should I call a technician for I60?

Call a technician if the error persists after troubleshooting or if you suspect internal failures.

Sources & References

Data last verified: 2026-01-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!