Ge Dishwasher Error C8

⚡ Quick Answer: C8 means GE Dishwasher error C8 indicates a malfunction in the drain pump, often accompanied by unusual noises during operation. This is typically a DIY fix.

What Does Error C8 Mean?

GE Dishwasher error C8 indicates a malfunction in the drain pump, often accompanied by unusual noises during operation.

Common Causes

  • Drain Pump (50% likelihood)
  • Blocked Drain Hose (30% likelihood)
  • Faulty Control Board (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Drain Filter

    Remove the lower dish rack and take out the drain filter. Clean any debris or food particles that may be obstructing it.

    Pro tip: Rinse the filter under running water for thorough cleaning.

  2. Step 2: Check the Drain Hose

    Examine the drain hose for kinks or blockages. Ensure it is properly connected and not clogged.

    Use a flashlight to inspect hard-to-see areas.

  3. Step 3: Test the Drain Pump

    With the dishwasher still connected, run a short cycle and listen for the drain pump. If it’s silent or making unusual noises, it may need replacement.

    If the pump is noisy, it could indicate a blockage or failure.

  4. Step 4: Inspect Electrical Connections

    Check the wiring and connections to the drain pump for any signs of damage or corrosion.

    Ensure all connections are secure before testing.

  5. Step 5: Replace the Drain Pump if Necessary

    If the pump is faulty, disconnect the power and water supply, then remove the old pump and install a new one following the manufacturer's instructions.

    Keep track of all screws and parts during replacement.

How to Reset

To reset the C8 error, hold the Start and Cancel buttons simultaneously for 3 seconds. This may clear the error if the underlying issue is resolved.

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-30 ohms
part_number WD19X10018
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the C8 error myself?

Yes, if you have basic tools and follow the troubleshooting steps, you can resolve the issue.

How long will it take to fix the C8 error?

The repair process typically takes about 45-60 minutes, depending on the specific issue.

What causes the C8 error in my GE dishwasher?

The C8 error is usually caused by a malfunctioning drain pump or blockages in the drain system.

Should I call a professional for the C8 error?

You may want to call a professional if you are uncomfortable working with electrical components or if the issue persists after your attempts to fix it.

What happens if I ignore the C8 error?

Ignoring the C8 error can lead to water pooling in the dishwasher, potential leaks, and further damage to the appliance.

User Comments (0)

Share your experience or solution below.

Be the first to comment!