Ge Dishwasher Error C6

⚡ Quick Answer: C6 means GE Dishwasher error C6 indicates a malfunction in the drain pump, often accompanied by unusual noises during operation o... This is typically a DIY fix.

What Does Error C6 Mean?

GE Dishwasher error C6 indicates a malfunction in the drain pump, often accompanied by unusual noises during operation or failure to drain water.

Common Causes

  • Drain Pump (50% likelihood)
  • Pump Motor (30% likelihood)
  • Electrical Connections (20% likelihood)

Troubleshooting Steps

  1. Step 1: Check the Drain Filter

    Remove the lower dish rack and check the drain filter for debris or foreign objects that may be obstructing the pump.

    Cleaning the filter can often resolve the issue.

  2. Step 2: Inspect the Drain Pump

    Access the drain pump by removing the cover. Look for any visible blockages or damage to the pump.

    Ensure the pump impeller moves freely.

  3. Step 3: Test the Pump Motor

    Use a multimeter to check the resistance of the pump motor. If it reads outside the expected range, the motor may need replacement.

    Typical resistance should be between 10-30 ohms.

  4. Step 4: Check Electrical Connections

    Inspect the wiring and connections to the drain pump for any signs of corrosion or looseness. Tighten or replace as necessary.

    Good connections are crucial for pump operation.

  5. Step 5: Reassemble and Test

    Reassemble the dishwasher and run a short cycle to see if the error code persists.

    Listen for normal operation sounds.

How to Reset

To reset the C6 error, hold the Start and Cancel buttons simultaneously for 3 seconds, then run a short cycle to see if the error clears.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number WD19X10018
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the C6 error myself?

Yes, with basic tools and some troubleshooting skills, you can address the C6 error.

How long will it take to fix the C6 error?

The repair typically takes about 45-60 minutes depending on the issue.

What causes the C6 error in GE dishwashers?

The C6 error is usually caused by a malfunctioning drain pump or blockages preventing drainage.

Should I call a professional for the C6 error?

If you're uncomfortable with electrical components or the issue persists after your attempts, it's best to call a pro.

What happens if I ignore the C6 error?

Ignoring the C6 error can lead to water pooling in the dishwasher, potentially causing further damage.

User Comments (0)

Share your experience or solution below.

Be the first to comment!