Ge Dishwasher Error C5

⚡ Quick Answer: C5 means GE Dishwasher error C5 indicates a malfunction in the drain pump, often accompanied by unusual noises during operation. This is typically a DIY fix.

What Does Error C5 Mean?

GE Dishwasher error C5 indicates a malfunction in the drain pump, often accompanied by unusual noises during operation.

Common Causes

  • Drain Pump (50% likelihood)
  • Blocked Drain Hose (30% likelihood)
  • Faulty Control Board (20% likelihood)

Troubleshooting Steps

  1. Step 1: Check the Drain Filter

    Remove the lower spray arm and check the drain filter for debris or foreign objects that may be blocking water flow.

    Clean the filter thoroughly to ensure proper drainage.

  2. Step 2: Inspect the Drain Pump

    Access the drain pump by removing the cover. Check for clogs or obstructions in the pump impeller.

    If the impeller is damaged, replacement is necessary.

  3. Step 3: Examine the Drain Hose

    Inspect the drain hose for kinks or blockages. Ensure it is properly connected and not pinched.

    Replace the hose if it shows signs of wear or damage.

  4. Step 4: Test the Drain Pump Motor

    Using a multimeter, test the drain pump motor for continuity. If there is no continuity, the motor needs replacement.

    Ensure power is disconnected before testing.

  5. Step 5: Check the Control Board

    Inspect the control board for any visible damage or burnt components. If damaged, it may need to be replaced.

    Consider professional assistance for control board issues.

How to Reset

To reset the C5 error, press and hold the Start/Cancel button for 3 seconds. This may clear the error if the underlying issue is resolved.

Technical Specifications

wattage 60W
component Drain Pump
resistance 10-20 ohms
part_number WD19X10015
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the C5 error myself?

Yes, with basic tools and some mechanical knowledge, you can troubleshoot and fix the C5 error.

How long will it take to resolve the C5 error?

Typically, fixing the C5 error will take about 45-60 minutes, depending on the issue.

What causes the C5 error in my GE dishwasher?

The C5 error is primarily caused by a malfunctioning drain pump or obstructions in the drainage system.

Should I call a professional for the C5 error?

If you're uncomfortable with electrical components or if the issue persists after troubleshooting, it's best to call a professional.

What happens if I ignore the C5 error?

Ignoring the C5 error can lead to water pooling in the dishwasher, potentially causing further damage or mold growth.

User Comments (0)

Share your experience or solution below.

Be the first to comment!