GE Dishwasher Error C2
⚡ Quick Answer: The GE dishwasher C2 error indicates a drainage issue where the pump-out cycle exceeds 7 minutes, often due to a blockage or a faulty drain pump. Comm... ✅ DIY Fixable
What Does Error C2 Mean?
The GE dishwasher C2 error indicates a drainage issue where the pump-out cycle exceeds 7 minutes, often due to a blockage or a faulty drain pump. Common symptoms include the dishwasher stopping mid-cycle, water remaining at the bottom, and extended running without successful drainage. Troubleshooting can involve clearing blockages, checking hose connections, and inspecting the drain pump.
Common Symptoms:
- Dishwasher stops mid‑cycle and displays C2
- Water remains in the bottom of the dishwasher after a cycle
- Extended pump/running without successful drainage
Possible Causes
- Drain line blockage (high)
- Drain hose kink or improper routing (medium)
- Garbage disposal knockout plug not removed (medium)
- Weak or faulty drain pump (medium)
How to Fix Error C2
DIY Fix Clear visible drainage blockages
- Turn off power to the dishwasher.
- Remove standing water with a sponge or cup.
- Check and clean the drain filter and sump area inside the tub.
- Inspect the drain hose for kinks, clogs, or poor routing.
DIY Fix Verify garbage disposal connection
- If connected to a garbage disposal, disconnect the drain hose.
- Check that the knockout plug has been removed from the disposal inlet.
- Reattach the hose ensuring a proper high loop under the sink.
Technician Only Inspect and test drain pump
- Access the dishwasher’s drain pump according to model service manual.
- Check for obstructions in the pump impeller.
- Test the pump electrical functionality.
- Replace the pump if defective.
Parts needed: drain pump assembly
- If after clearing visible blockages and verifying hose/disposal connections the C2 error persists
- If water remains undrained and you are unable to access or safely inspect the drain pump area
Next step
Choose the next step for C2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | WD19X10018 |
| voltage_rating | 120V AC |
Common Questions
What does C2 error mean on GE dishwasher?
C2 error means the drain pump is not effectively removing water, causing the dishwasher to stop mid-cycle.
Can I fix GE dishwasher C2 error myself?
Yes, you can clear visible blockages, check the drain filter, and verify garbage disposal connections.
How much does it cost to fix C2 error?
The repair cost for the C2 error typically ranges from $60 to $180 for parts, plus labor.
When should I call a technician for C2?
Call a technician if the error persists after troubleshooting or if you cannot safely inspect the drain pump.
Sources & References
- GE Dishwasher Error Codes - GE Appliances (official)
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!