Kenmore Washing Machine: loud in spin cycle

Professional Repair Guide

What is this symptom?

Experiencing loud noises from your Kenmore washing machine during the spin cycle? Common symptoms include banging, grinding, and excessive vibration. These sounds can disrupt your laundry routine and may indicate underlying issues such as an unbalanced load or worn bearings. Identifying the cause early can help prevent further damage and costly repairs.

Urgency: Medium

Important Tips for Kenmore Models

  • Some Kenmore models (e.g., older 110 series) have reported worn clutch assembly causing loud spin noises.

Possible Causes

Unbalanced laundry load

How to Identify: Loud banging or thudding that changes or reduces when the wash is paused and clothes are redistributed evenly.

Part: Drum/load distribution

Worn or faulty drum/tub bearings

How to Identify: Grinding, roaring or jet‑engine sounds that grow louder with drum speed; drum may feel rough or loose when moved by hand.

Part: Drum bearings/tub bearings

Damaged suspension/shock absorbers (Top/Front Loaders)

How to Identify: Thumping or rattling with excessive vibration; visible drum movement beyond normal play.

Part: Suspension springs or shock absorbers

DIY Solutions

Balance laundry load

Easy 2–5 minutes
  1. Pause the washer mid‑cycle
  2. Redistribute clothes evenly around the drum
  3. Restart spin cycle
⚠️ Safety First: Do not open mid‑cycle without pausing to avoid water spill

Level the washing machine

Moderate 10–20 minutes
Tools Needed: Spirit level, Wrench for feet adjustment
  1. Use a spirit level on top of the washer
  2. Adjust adjustable feet to level machine
  3. Ensure all feet are stable on the floor

Inspect drum for foreign objects

Moderate 10–15 minutes
  1. Unplug washer
  2. Check inside drum and around seals for coins or small objects
  3. Remove objects if found
⚠️ Safety First: Always unplug before reaching inside drum

Professional Repairs

Replace drum/tub bearings

Estimated Cost: $300–$600

Replace suspension/shock absorbers

Estimated Cost: $150–$300

Replace motor coupling or drive belt

Estimated Cost: $100–$250

Replace clutch assembly

Estimated Cost: $150–$350

When to Call a Professional

Noise persists after load balance and leveling
Grinding/metal‑on‑metal sound indicating internal part failure
Excessive vibration that could damage machine

Preventive Maintenance

  • Level machine periodically: Excessive vibration and noise
    Frequency: monthly
  • Inspect and clean drum for foreign items: Noise from trapped objects
    Frequency: weekly/monthly
  • Avoid overloading washer: Unbalanced loads and strain on components
    Frequency: every use

Frequently Asked Questions

Why is my Kenmore Washing Machine loud in spin cycle?
Common causes include an unbalanced laundry load, worn drum bearings, or damaged shock absorbers.
How do I fix Kenmore Washing Machine loud in spin cycle myself?
You can balance the load, level the machine, or check for foreign objects in the drum.
How much does it cost to fix loud in spin cycle?
Professional repairs can range from $100 to $600 depending on the issue and parts needed.
When should I call a technician for loud in spin cycle?
If DIY solutions don't work or if you suspect major issues like bearing or suspension damage.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

60%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Worn or damaged bearings in the gearcase
  • Unbalanced load causing excessive vibration
  • Loose or damaged drive belt

User Suggested Solutions

  1. Check for unbalanced load: Open the washer and redistribute the clothes evenly in the drum. Run a short spin cycle to see if the noise persists.

  2. Inspect and replace bearings: Disconnect the washer, remove the agitator, and check the bearings in the gearcase for wear. Replace if necessary.

  3. Examine and replace the drive belt: Disconnect the power, access the drive belt, and check for any signs of damage. Replace with a new belt if needed.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Kenmore 110.26112310 washer is loud in the spin cycle

Community Discussions

spin cycle is loud

Bad bearings in the gearcase may be causing the loud noise during the spin cycle.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!