Indesit Dishwasher: not functioning properly

Professional Repair Guide

What is this symptom?

Is your Indesit dishwasher not functioning properly? Common issues include failure to start, not filling with water, or stopping mid-cycle. These problems can stem from water supply issues, door latch faults, drainage blockages, or electronic malfunctions. Identifying the root cause is essential for effective troubleshooting and repair.

Urgency: Medium

Important Tips for Indesit Models

  • Indesit-specific FAQ notes water must drain before filling, ensure valves open and hoses not kinked

Possible Causes

Water supply issues (no fill or restricted fill)

How to Identify: Dishwasher doesn’t fill with water; error codes related to fill; no sound of water entering

Part: Water inlet valve / household water supply

Door latch or door switch fault

How to Identify: Dishwasher won’t start even though controls are set; door may not fully register as closed

Part: Door latch / microswitch

Drainage faults causing failure to start next cycle

How to Identify: Previous cycle ends with standing water; next cycle won’t begin; error codes relate to drain problems

Part: Drain pump / drain hose

Control board or electronic fault

How to Identify: Dishwasher shows no response or erratic behavior, error codes referencing board communication faults (e.g., F12, F13

Part: Main control board

Pump or circulation motor failure

How to Identify: Water doesn’t spray, wash won’t progress, unusual noises from pump area

Part: Circulation pump / motor

DIY Solutions

Ensure water supply is open and hoses unobstructed

Easy 5–10 minutes
  1. Locate water supply behind dishwasher
  2. Ensure the water tap supplying the dishwasher is fully open
  3. Check that the inlet hose is not kinked or crushed
⚠️ Safety First: Turn off water supply before adjusting hoses if needed

Check and reseat the dishwasher door latch

Easy 5–15 minutes
Tools Needed: Screwdriver (if access panel removal is needed)
  1. Open dishwasher and inspect door latch area for debris or misalignment
  2. Close door firmly until it clicks
  3. If needed, remove lower toe-kick panel to access latch mechanism and ensure proper engagement
⚠️ Safety First: Disconnect power before accessing internal components

Clear drain and filter blockages

Moderate 15–30 minutes
Tools Needed: Gloves, Bucket
  1. Remove and clean filter in dishwasher base
  2. Check drain hose for debris or blockages
  3. Remove clogs and reassemble filter
⚠️ Safety First: Disconnect power before working around drain area

Professional Repairs

Replace inlet valve

Estimated Cost: $50 - $120 (part) + labor

Service or replace control board

Estimated Cost: $150 - $400 (part) + labor

Replace circulation or drain pump

Estimated Cost: $100 - $300 (part) + labor

When to Call a Professional

Dishwasher still does not start after checking water supply and door latch
Error codes that point to internal electronic faults
Persistent drainage or pump issues that DIY cleaning does not resolve

Preventive Maintenance

  • Clean filter and check drain hose: Drain blockages that can cause malfunction
    Frequency: monthly
  • Inspect water inlet hose for kinks: Water fill issues
    Frequency: quarterly

Frequently Asked Questions

Why is my Indesit Dishwasher not functioning properly?
Common causes include water supply issues, door latch faults, and drainage problems.
How do I fix Indesit Dishwasher not functioning properly myself?
Check water supply, ensure door latch is seated correctly, and clear drain blockages.
How much does it cost to fix not functioning properly?
Professional repair costs range from $50 for parts to $400 for control board replacement.
When should I call a technician for not functioning properly?
If DIY solutions don't resolve the issue or if the problem involves complex repairs.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

65%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Faulty control board or electronic control module causing erratic behavior.
  • Stuck or malfunctioning buttons on the control panel leading to unintended program changes.
  • Electrical issues such as poor connections or power surges affecting the dishwasher's functionality.

User Suggested Solutions

  1. Reset the dishwasher by turning it off at the power source for 5 minutes, then turn it back on to see if the issue persists.

  2. Inspect the control panel for stuck buttons or debris. Clean the panel gently and ensure all buttons are functioning properly.

  3. Check the wiring and connections at the control board for any signs of damage or loose connections. Repair or replace as necessary.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Indesit IDE 100 working weird after power outage

User Comments (0)

Share your experience or solution below.

Be the first to comment!