Candy Dishwasher Error E8
⚡ Quick Answer: The E8 error code on Candy dishwashers indicates a drainage issue, often causing the appliance to stop mid-cycle. Symptoms include uncompleted cycles,... ✅ DIY Fixable
What Does Error E8 Mean?
The E8 error code on Candy dishwashers indicates a drainage issue, often causing the appliance to stop mid-cycle. Symptoms include uncompleted cycles, possible inadequate water heating, and malfunctioning spray arms. This error may be related to faults in the heating element or circulation components, leading to insufficient water drainage and circulation within the machine.
Common Symptoms:
- Dishwasher stops mid‑cycle with E8 displayed and beeping
- Cycle fails to complete
- Possible inadequate heating or circulation noticed by users
- Water level may appear low or spray arms not functioning
Possible Causes
- Heating element / temperature system faults (timeout heating water) (medium)
- Water circulation / hydraulic issues (medium)
How to Fix Error E8
DIY Fix Basic Checks and Reset
- Turn off and unplug the dishwasher for at least 5 minutes, then restart.
- Ensure dishes are not blocking spray arms and that spray arms rotate freely.
- Clean filters and spray arm jets of debris or scale.
- Verify water inlet is fully open and supply hoses are not kinked.
Technician Only Test Heating and Circulation Components
- Use a multimeter to test continuity of the heating element and NTC temperature sensor.
- Inspect wiring connectors to the heater and sensor for corrosion or loose contacts.
- Check pump and circulation system for blockages or wear.
- Replace defective parts such as NTC sensor, heating element, or circulation pump as needed.
Parts needed: NTC temperature sensor, Heating element, Circulation pump, Spray arms / hydraulic side distributor
- If after basic checks the error persists
- If you are not comfortable testing electrical components with proper tools
- If internal parts like heating elements or sensors need replacement
Next step
Choose the next step for E8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | CANDY 41013201 |
| voltage_rating | 230V AC |
Common Questions
What does E8 error mean on Candy Dishwasher?
E8 indicates a drainage issue, causing the dishwasher to stop mid-cycle and possibly affecting heating and circulation.
Can I fix Candy Dishwasher E8 error myself?
Yes, basic checks include resetting the appliance, ensuring spray arms are free, and cleaning filters.
How much does it cost to fix E8 error?
Repair costs range from $50 to $300+, depending on parts and labor needed.
When should I call a technician for E8?
Call a technician if the error persists after basic checks or if you're uncomfortable testing electrical components.
Sources & References
- Candy CDIM 5146 errore E8 a fine lavaggio (community)
- Riparazione lavastoviglie Candy errore E8 (community)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!