Candy Dishwasher Error E3
⚡ Quick Answer: The Candy Dishwasher E3 error indicates a drainage issue, often resulting in the appliance stopping mid-cycle. This error may be due to water not heat... ✅ DIY Fixable
What Does Error E3 Mean?
The Candy Dishwasher E3 error indicates a drainage issue, often resulting in the appliance stopping mid-cycle. This error may be due to water not heating to the required temperature or failure to evacuate water properly. Users may notice residual water remaining in the machine, a humming sound, or the display showing a continuous cycle. Regular maintenance and checks can help mitigate these issues.
Common Symptoms:
- Dishwasher stops mid‑cycle with E3 displayed
- Water not reaching set temperature
- Dishwasher does not drain completely (residual water remains)
Possible Causes
- Heating/temperature sensing fault (medium)
- Drainage/evacuation fault (low)
How to Fix Error E3
DIY Fix Basic initial checks and reset
- Turn off and unplug the dishwasher, wait a few minutes, then power it back on to see if error clears.
- Ensure the dishwasher has adequate water supply and is not overloaded.
- Check and clean accessible filters and spray arms to improve circulation.
Technician Only Inspect heating and drainage systems
- Test the heating element and temperature sensor for correct resistance and operation.
- Inspect electrical connections related to heating and control board.
- If E3 appears to relate to drainage, check drain pump operation, clear debris from pump and drain hose, and verify pressure switch functionality.
Parts needed: Heating element, Temperature sensor (NTC), Drain pump, Drain hose, Control board
- If error persists after basic reset and cleaning.
- If tests show failed heating element or temperature sensor.
- If drainage components are confirmed blocked or pump is defective.
Next step
Choose the next step for E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E3 error mean on Candy Dishwasher?
E3 indicates a drainage issue or heating malfunction, causing the dishwasher to stop mid-cycle.
Can I fix Candy Dishwasher E3 error myself?
Yes, perform basic checks like resetting the appliance, ensuring proper water supply, and cleaning filters.
How much does it cost to fix E3 error?
Repair costs for the E3 error range from $100 to $350+, depending on parts and labor.
When should I call a technician for E3?
Call a technician if the error persists after a reset, or if heating or drainage components are confirmed faulty.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!