Candy Dishwasher Error E6
⚡ Quick Answer: The Candy Dishwasher E6 error indicates a drainage failure, typically caused by a malfunction in the turbidity or optical sensor. This error may preve... ✅ DIY Fixable
What Does Error E6 Mean?
The Candy Dishwasher E6 error indicates a drainage failure, typically caused by a malfunction in the turbidity or optical sensor. This error may prevent the dishwasher from starting the wash cycle or cause it to stop shortly after filling, often accompanied by a humming sound. In cases where the turbidity sensor misreads water clarity, cleaning performance may be affected. Resolving this issue usually involves cleaning the sensor area or inspecting sensor wiring for connectivity problems.
Common Symptoms:
- Dishwasher stops and displays E6
- May not start washing phase or stops shortly after filling
- Possible affected cleaning performance if turbidity sensor misreads water clarity
Possible Causes
- Turbidity/optical sensor malfunction (medium)
- Sensor wiring/connectivity issue (medium)
How to Fix Error E6
DIY Fix Clean and reset turbidity sensor area
- Turn off and disconnect power to the dishwasher
- Remove lower spray arm and filter assembly
- Gently clean around the turbidity sensor window with a soft cloth and hot soapy water
- Reassemble and restart dishwasher to see if error clears
Technician Only Inspect, test, and replace turbidity sensor or wiring
- Disconnect power and remove access panels to locate turbidity sensor
- Visually inspect sensor and associated wiring harness for corrosion or loose connections
- Test sensor function with appropriate tools (multimeter or diagnostics)
- Replace faulty turbidity sensor and repair wiring as needed
Parts needed: Turbidity/optical sensor, Wiring harness/connectors
- If cleaning and basic inspection do not clear error after repeated cycles
- If sensor wiring appears damaged or inaccessible without technical tools
Next step
Choose the next step for E6
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E6 error mean on Candy Dishwasher?
E6 indicates a drainage failure, often due to a turbidity sensor malfunction.
Can I fix Candy Dishwasher E6 error myself?
Yes, you can clean the turbidity sensor area and reset the dishwasher.
How much does it cost to fix E6 error?
Repair costs range from $50 to $200, depending on parts and labor.
When should I call a technician for E6?
Call a technician if cleaning doesn't resolve the error or if wiring is damaged.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!