Candy Dishwasher Error E7

⚡ Quick Answer: The Candy Dishwasher E7 error indicates a failure in the drain pump or issues with water circulation. This error may prevent the dishwasher from compl... ✅ DIY Fixable

What Does Error E7 Mean?

The Candy Dishwasher E7 error indicates a failure in the drain pump or issues with water circulation. This error may prevent the dishwasher from completing its cycle, display an E7 code, and result in unusual noises during operation. It is often due to faults in the flow meter or a communication issue between the circulation system and the control board, leading to inconsistent water flow and measurement.

Common Symptoms:

  • Dishwasher cycle may not complete or start
  • E7 displayed on screen or via LED flash pattern
  • Pump or circulation related issues observed
  • Inconsistent water flow/measurement

Possible Causes

  • Flow meter or water intake measurement fault (medium)
  • Communication fault between pump/circulation system and control board (medium)

How to Fix Error E7

DIY Fix Basic user checks for E7

  1. Turn off and unplug the dishwasher to ensure safety
  2. Check and clean inlet hose filters and any visible mesh filters
  3. Ensure water supply is on and not low pressure
  4. Observe if spray arms and water flow appear blocked

Technician Only Technician‑level diagnosis and repair

  1. Inspect and test the flow meter assembly and clean/replace if necessary
  2. Check wiring harness and connectors between circulation pump/flow meter and control board for corrosion or looseness
  3. Inspect and test circulation pump rotor for blockage or seizure
  4. Use multimeter to test sensor continuity and control board inputs if accessible

Parts needed: Flow meter assembly, Circulation pump, Wiring harness/connectors

🛑 When to Call a Pro:
  • If error persists after basic checks
  • If internal components need access beyond user‑level safety skills
  • If wiring or control board faults are suspected

Technical Specifications

wattage 30W
component Drain Pump
resistance 10-30 ohms
part_number C00303434
voltage_rating 230V AC

Common Questions

What does E7 error mean on Candy Dishwasher?

E7 indicates a failure in the drain pump or water circulation issues, preventing the cycle from completing.

Can I fix Candy Dishwasher E7 error myself?

Yes, you can check and clean inlet hose filters, ensure water supply is adequate, and reset the dishwasher.

How much does it cost to fix E7 error?

Repair costs range from $50 to $200+, depending on parts needed and service fees.

When should I call a technician for E7?

Call a technician if the error persists after basic checks or if internal components require professional access.

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!