Candy Dishwasher Error E2
⚡ Quick Answer: The Candy Dishwasher E2 error indicates a drainage issue, typically caused by insufficient water reaching the appliance. This may prevent the dishwash... ✅ DIY Fixable
What Does Error E2 Mean?
The Candy Dishwasher E2 error indicates a drainage issue, typically caused by insufficient water reaching the appliance. This may prevent the dishwasher from filling properly, leading to incomplete cycles and unusual sounds during operation. Common causes include a blocked inlet filter, low water pressure, or a malfunctioning water inlet valve or pressure sensor.
Common Symptoms:
- Dishwasher stops mid‑cycle with E2 displayed
- Dishwasher does not fill with water or fills extremely slowly
- Cycle does not progress past initial fill phase
Possible Causes
- Insufficient water reaching the dishwasher (medium)
- Dirty or blocked inlet filter / low water pressure (medium)
- Faulty water inlet valve or pressure sensor (low)
How to Fix Error E2
DIY Fix Check water supply and basic configuration
- Ensure the water supply faucet feeding the dishwasher is fully open.
- Check water pressure at the tap; if very low, wait or increase supply pressure if possible.
- Unplug the dishwasher and check that the inlet hose is not kinked or blocked.
DIY Fix Clean inlet filter and hose connection
- Turn off water and power to the dishwasher.
- Disconnect the inlet hose from the dishwasher and inspect the small filter screen.
- Clean any debris from the filter and reattach the hose securely.
- Restart the dishwasher to test if the error clears.
Technician Only Inspect or replace water inlet valve / pressure sensor
- Test water inlet valve operation with a multimeter for continuity and proper actuating function.
- Check the pressure switch or sensor and associated hose for correct operation and leaks.
- Replace any defective components and verify correct water fill during test cycle.
Parts needed: water inlet valve, pressure sensor / pressure switch, inlet hose
- If cleaning/ basic checks do not resolve the issue and the machine still fails to fill water properly
- If internal electronic components such as inlet valve or pressure sensor appear to be malfunctioning
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | CANDY 41011480 |
| voltage_rating | 230V AC |
Common Questions
What does E2 error mean on Candy Dishwasher?
E2 indicates a drainage problem, usually due to insufficient water reaching the dishwasher.
Can I fix Candy Dishwasher E2 error myself?
Yes, check the water supply, inspect the inlet filter, and clean any blockages.
How much does it cost to fix E2 error?
Estimated repair costs for E2 range between €50 and €180 for parts only.
When should I call a technician for E2?
Call a technician if basic checks do not resolve the issue or if internal components appear faulty.
Sources & References
- Codici errori lavastoviglie Candy (community)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!