Beko Dishwasher Error P6

⚡ Quick Answer: The Beko dishwasher P6 error indicates a malfunction related to the temperature sensor (NTC), which may cause the dishwasher to stop mid-cycle or fail... ✅ DIY Fixable

What Does Error P6 Mean?

The Beko dishwasher P6 error indicates a malfunction related to the temperature sensor (NTC), which may cause the dishwasher to stop mid-cycle or fail to heat water properly. This can lead to improper program progression and unusual noises. To resolve this issue, first perform a basic reset by disconnecting power for several minutes and checking for any obstructions in the filters. If the error persists, further inspection of the temperature sensor and its circuitry may be necessary.

Common Symptoms:

  • Dishwasher displays error code P6 on the panel
  • Dishwasher may stop mid‑cycle
  • Possible issues with temperature‑dependent functions (heating, program progression)

Possible Causes

  • Temperature sensor (NTC) reporting wrong values (low)

How to Fix Error P6

DIY Fix Basic checks and reset

  1. Turn off the dishwasher and disconnect power for several minutes to reset the control electronics.
  2. Restart the dishwasher to see if the P6 code persists.
  3. Ensure that filters are clean and that nothing is obstructing normal operation.

Technician Only Inspect and test temperature sensor circuit

  1. Access the dishwasher’s main temperature sensor (NTC) and wiring harness.
  2. Test the sensor’s resistance at known temperatures to verify correct behavior.
  3. Inspect wiring/connectors for corrosion, damage, or poor connection.
  4. Replace the temperature sensor if it fails testing.

Parts needed: NTC temperature sensor, Wiring harness/connectors

🛑 When to Call a Pro:
  • If the error persists after a reset and cleaning filters
  • If you are not comfortable testing internal sensors or the dishwasher involves complex diagnostics
  • If there are additional symptoms (leaks, smoke, unusual noises)

Technical Specifications

wattage 30W
component Drain Pump
resistance 10-20 ohms
part_number Beko 1742000100
voltage_rating 230V AC

Common Questions

What does P6 error mean on beko dishwasher?

P6 error indicates a malfunction with the temperature sensor, affecting heating and cycle progression.

Can I fix beko dishwasher P6 error myself?

Yes, try resetting the dishwasher and cleaning the filters to see if the error resolves.

How much does it cost to fix P6 error?

Estimated repair cost for the temperature sensor is ¥5,000–¥15,000 plus labor.

When should I call a technician for P6?

Call a technician if the error persists after a reset, or if you're uncomfortable testing internal components.

Sources & References

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!