Beko Dishwasher: not washing

Possible Causes

Clogged filters

How to Identify: Food debris visible on filters; water pooling; poor water circulation

Part: Drain/filter assembly

Blocked spray arms

How to Identify: Spray arm holes visibly blocked; arms don’t spin freely or water spray weak

Part: Upper and lower spray arms

Incorrect loading / overloading

How to Identify: Dishes touching each other or obstructing spray arms; upper rack items tipping

Part: User loading practices affecting water reach

Wrong detergent type or usage

How to Identify: Detergent not dissolving; residue left on dishes; wet dispenser at start

Part: Detergent dispenser/detergent

Inappropriate wash program selected

How to Identify: Using quick or low-temperature cycles for heavily soiled dishes

Part: Control panel/program selection

Low inlet water temperature

How to Identify: Cold water entering dishwasher; detergent not activating fully

Part: Water heating system

DIY Solutions

Clean the dishwasher filter

Moderate 10-15 minutes

Tools Needed: warm water, soft brush

1. Pull out bottom rack
2. Locate and remove drain filter
3. Rinse filter under warm water and scrub debris
4. Reinstall filter properly

⚠️ Safety First: Ensure dishwasher is off and cool before handling filters

Clear spray arms

Moderate 15-20 minutes

Tools Needed: warm water, brush or toothpick

1. Remove upper and lower spray arms
2. Rinse under water and use brush/toothpick to clear holes
3. Check arms spin freely
4. Reattach securely

⚠️ Safety First: Do not force arms; note orientation for reinstallation

Re-load dishes properly

Easy 5 minutes

1. Remove some items to avoid overloading
2. Ensure no dishes block spray arm rotation
3. Tilt cups downward

Check and adjust detergent usage

Easy 5 minutes

1. Ensure detergent is dry before adding
2. Use recommended dishwasher detergent
3. Measure correct amount per soil level

Select appropriate wash program

Easy 1 minute

1. Choose a cycle with higher temperature/longer wash for heavy soil

Professional Repairs

Inspect and repair water heating element or thermostat

Estimated Cost: $100 - $300

Check and replace spray arms or filter components

Estimated Cost: $50 - $150

When to Call a Professional

Dishwasher displays error codes related to wash cycle failure

Water heating is malfunctioning

Mechanical noise or broken parts are detected after DIY attempts

Preventive Maintenance

• Clean filters: Clogs that reduce cleaning efficiency
  Frequency: monthly
• Inspect spray arms: Blockages that impede spray water distribution
  Frequency: monthly

Frequently Asked Questions

Why is my Beko Dishwasher not washing?

Common causes include clogged filters, blocked spray arms, incorrect loading, and wrong detergent usage.

How do I fix Beko Dishwasher not washing myself?

Clean the filter, clear spray arms, adjust loading, check detergent, and select the right wash program.

How much does it cost to fix not washing?

Professional repairs can range from $50 to $300, depending on the issue.

When should I call a technician for not washing?

Call a technician if DIY solutions don't work or if you suspect heating element issues.

References & Sources

• Beko dishwasher how to fix not cleaning Official
• Beko UK support why dishwasher not cleaning Official

Can I Fix This Myself?

100%

DIY Success Rate Difficulty: DIY

Common Issues Reported by Users

• Faulty motor capacitor (1 mentions)
• Door latch or PCB issues (1 mentions)
• Drain pump or solenoid malfunction (1 mentions)

User Suggested Solutions

1. Replace motor capacitor

   Success rate: 33.0%

2. Tilt the dishwasher to resolve lights blinking issue

   Success rate: 33.0%

Community Discussions

circulator pumping but no water movement

One of the motor capacitors was fried, replaced and running fine again

DIY View on Reddit →

Lights blinking, won't wash

Tilt the dishwasher to resolve the issue.

DIY View on Reddit →

Source: Reddit r/appliancerepair