Beko Dishwasher Error E05
⚡ Quick Answer: The Beko dishwasher error E05 indicates a malfunction related to the drain pump, often linked to issues with the turbidity sensor or temperature probe... ✅ DIY Fixable
What Does Error E05 Mean?
The Beko dishwasher error E05 indicates a malfunction related to the drain pump, often linked to issues with the turbidity sensor or temperature probe. This error typically occurs early in the wash cycle and may be accompanied by unusual noises and interruptions in the wash process. If the dishwasher displays E05 shortly after starting, it may be due to a faulty water quality sensor or an open circuit in the temperature probe. Performing basic checks such as cleaning filters and resetting the appliance may help resolve the issue.
Common Symptoms:
- Dishwasher stops and displays E05 early in the wash cycle
- Error appears shortly after start
- May coincide with unusual water temperature readings or wash interruptions
Possible Causes
- Turbidity sensor / water quality sensor fault (medium)
- Temperature probe (thermistor) open circuit (medium)
How to Fix Error E05
DIY Fix Basic checks and reset
- Turn off the dishwasher and disconnect power for at least 5 minutes
- Ensure filters and spray arms are clean and unobstructed
- Restart the dishwasher and see if E05 reappears
Technician Only Inspect and test sensors and wiring
- Access the dishwasher control area and locate the turbidity/water quality sensor and temperature probe
- Check wiring harnesses and connectors for corrosion, loose connections, or damage
- Use a multimeter to test sensor continuity and resistance according to model specifications
- Replace faulty sensor or repair wiring as needed
Parts needed: Turbidity/water quality sensor, Temperature probe/thermistor, Wiring harness/connectors
- If the error persists after basic checks and reset
- If you are uncomfortable accessing internal components or testing electrical circuits
Next step
Choose the next step for E05
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Beko 1741000100 |
| voltage_rating | 220-240V AC |
Common Questions
What does E05 error mean on beko dishwasher?
E05 indicates a malfunction related to the drain pump, often due to sensor faults.
Can I fix beko dishwasher E05 error myself?
Yes, you can perform basic checks like cleaning filters and resetting the machine.
How much does it cost to fix E05 error?
Repair costs for E05 error range from ¥8,000 to ¥25,000 depending on parts and labor.
When should I call a technician for E05?
Call a technician if the error persists after basic checks or if you're uncomfortable with internal repairs.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!