Beko Dishwasher Error E02

⚡ Quick Answer: The Beko dishwasher error E02 indicates a fault in the water supply or fill system, often resulting in insufficient water entering the appliance. Symp... ✅ DIY Fixable

What Does Error E02 Mean?

The Beko dishwasher error E02 indicates a fault in the water supply or fill system, often resulting in insufficient water entering the appliance. Symptoms may include the dishwasher not filling with water, filling very slowly, or stopping shortly after starting. Some models may also trigger leak protection if water is detected in the base, leading to unusual pump noises. Addressing this error typically involves checking the water supply and inlet components.

Common Symptoms:

  • Dishwasher not filling with water or fills very slowly.
  • Dishwasher stops soon after start and displays E02.
  • Some units show water presence in base triggering leak protection (Aqua Safe).

Possible Causes

  • Insufficient or blocked water supply (inlet filter or hose) (medium)

How to Fix Error E02

DIY Fix Check water supply and inlet components

  1. Ensure the household water supply valve to the dishwasher is fully open and water pressure is adequate.
  2. Turn off the dishwasher power and water supply before inspecting.
  3. Check the inlet hose for kinks or visible blockage and straighten/clean if needed.
  4. Locate and clean the inlet filter (at the water hose connection) of debris or buildup.

Technician Only Inspect and replace faulty water inlet valve or address leak protection

  1. Disconnect the dishwasher from power and water.
  2. Remove access panel to reach the water inlet valve.
  3. Test the inlet valve for proper operation and continuity with a multimeter.
  4. Replace the valve if it fails testing.
  5. Check the base pan for water and test the Aqua Safe / float assembly. Repair leaks as necessary and ensure the leak sensor resets.

Parts needed: Water inlet valve, Inlet filter assembly, Hoses/connectors, Aqua Safe float sensor components

🛑 When to Call a Pro:
  • After basic water supply and filter checks if E02 persists.
  • If water leaks are present in the base pan or leak protection repeatedly triggers.
  • If inlet valve replacement is required.

Technical Specifications

wattage 30W
component Drain Pump
resistance 10-20 ohms
part_number Beko 1742000100
voltage_rating 230V AC

Common Questions

What does E02 error mean on Beko dishwasher?

E02 indicates a water supply issue, such as insufficient fill or activated leak protection.

Can I fix Beko dishwasher E02 error myself?

Yes, check the water supply valve and inlet hose for blockages before seeking professional help.

How much does it cost to fix E02 error?

Repair costs are typically moderate, depending on parts like the water inlet valve.

When should I call a technician for E02?

Call a technician if E02 persists after checking the water supply or if leaks are present.

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!