Beko Dishwasher Error P5

⚡ Quick Answer: The Beko dishwasher error P5 indicates an issue with the diverter valve, which controls water flow during cycles. This can prevent the dishwasher from... ✅ DIY Fixable

What Does Error P5 Mean?

The Beko dishwasher error P5 indicates an issue with the diverter valve, which controls water flow during cycles. This can prevent the dishwasher from starting and may produce unusual noises. It's essential to check if the diverter valve is in the correct position and inspect for any obstructions that could affect performance.

Common Symptoms:

  • Dishwasher stops and will not start with P5 displayed.

Possible Causes

  • Diverter valve not reaching or detected in correct position during cycle (medium)

How to Fix Error P5

DIY Fix Basic checks and reset

  1. Turn off and unplug dishwasher for at least 10 minutes.
  2. Restore power and try restarting a wash cycle to see if the error clears.
  3. Ensure there are no obvious obstructions inside that could mechanically block internal components.

Technician Only Inspect and service diverter valve and associated sensors

  1. Access the diverter valve assembly and check for mechanical blockage or stiffness.
  2. Verify electrical connections and continuity of the diverter position sensor.
  3. Replace the diverter valve assembly if it fails mechanical or electrical diagnostics.

Parts needed: Diverter valve, Position sensor (if separate)

🛑 When to Call a Pro:
  • If the error persists after a basic reset.
  • If water leakage, unusual noises, or other faults accompany the P5 error.
  • If you are not experienced with internal dishwasher component servicing.

Next step

Choose the next step for P5

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Drain Hose

Carries waste water from the drain pump to your home's standpipe or sink drain.

$15 - $30 · Easy · 15-30 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 30W
component Drain Pump
resistance 10-20 ohms
part_number Beko 1741000200
voltage_rating 230V AC

Common Questions

What does P5 error mean on Beko dishwasher?

P5 indicates a diverter valve position error, preventing proper water flow.

Can I fix Beko dishwasher P5 error myself?

Yes, you can try basic checks like resetting the dishwasher and ensuring no obstructions are present.

How much does it cost to fix P5 error?

Repair costs are medium, varying by region for parts and labor.

When should I call a technician for P5?

Call if the error persists after a reset, or if you notice water leakage or unusual noises.

Sources & References

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!