Beko Dishwasher Error P3
⚡ Quick Answer: The Beko dishwasher error P3 typically indicates a user setting for turning off the warning sound and inner illumination rather than a malfunction. Ho... ✅ DIY Fixable
What Does Error P3 Mean?
The Beko dishwasher error P3 typically indicates a user setting for turning off the warning sound and inner illumination rather than a malfunction. However, on certain models, it may suggest a water inlet or circulation issue. If you see the P3 code, refer to your specific model's manual to confirm if it is merely a setting or an actual error. Unusual noises and failure to drain water can accompany this code if it points to a fault.
Common Symptoms:
- Dishwasher display shows ‘P3’ code or indicator during operation or setup
Possible Causes
- Display indicates user setting selection rather than a malfunction (high)
- Possible water inlet or circulation issue on other models (unconfirmed) (low)
How to Fix Error P3
DIY Fix Verify if P3 is a setting or an error
- Check your specific model’s user manual for P3 meaning, especially in the section explaining display codes and indicator lights.
- If your manual shows P1–P4 as submenu options, adjust the setting if needed (P3 often is a sound/illumination option).
DIY Fix Basic checks if you suspect a real fault (for P3 on models where it might indicate water issue)
- Ensure the water supply tap to the dishwasher is fully open.
- Check that the water inlet hose isn’t kinked or blocked.
- Clean the filter and ensure no debris is blocking water entry.
Technician Only Model‑specific diagnostic
- Obtain the correct service manual for the exact Beko dishwasher model number.
- Check error code lookup in official service documentation to confirm whether P3 is a setting, warning, or fault on that model.
- If P3 identifies a water inlet or circulation issue on that model, inspect/fix the inlet valve, float switch, or circulation pump as appropriate.
Parts needed: Service manual for specific model, Possible inlet valve, float switch, circulation pump
- If the dishwasher stops, displays P3 repeatedly, and manual confirms it’s not just a settings indicator
- If you are unable to verify the meaning of P3 from official model documentation
Next step
Choose the next step for P3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
- Typical part-only price
- $15 - $40
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 30-50 ohms |
| part_number | Beko 1742000200 |
| voltage_rating | 230V AC |
Common Questions
What does P3 error mean on beko dishwasher?
P3 usually indicates a user setting for sound and illumination, not a fault.
Can I fix beko dishwasher P3 error myself?
Yes, check your model's manual to confirm if P3 is a setting. If not, inspect the water supply and filters.
How much does it cost to fix P3 error?
Estimated repair costs range from $0 to $150+, depending on parts needed.
When should I call a technician for P3?
Contact a technician if P3 displays repeatedly or if you can't confirm its meaning from the manual.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!