Beko Dishwasher Error H6

⚡ Quick Answer: The Beko Dishwasher H6 error indicates a malfunction in the drainage system, often due to a failure or blockage in the circulation pump. This may resu... ✅ DIY Fixable

What Does Error H6 Mean?

The Beko Dishwasher H6 error indicates a malfunction in the drainage system, often due to a failure or blockage in the circulation pump. This may result in the dishwasher stopping mid-cycle, weak water spraying action, and unusual noises during operation. Regular maintenance and addressing potential blockages can help prevent this issue.

Common Symptoms:

  • Dishwasher stops mid‑cycle and displays H6
  • Water spraying action absent or weak
  • Noise changes (pump not running)

Possible Causes

  • Circulation pump failure or blockage (medium)
  • Conflicting alternative listing of water inlet issue (low)

How to Fix Error H6

DIY Fix Basic checks before service call

  1. Power cycle the dishwasher (turn off, wait 5 minutes, turn on) to clear transient errors
  2. Ensure no obstructions in spray arms or filters that might load the circulation pump
  3. Check for any unusual noises when starting a wash cycle

Technician Only Inspect and repair circulation pump assembly

  1. Disconnect power and water supply
  2. Remove dishwasher base panel to access circulation pump
  3. Inspect pump impeller for blockages or debris
  4. Test pump motor operation with multimeter
  5. Replace circulation pump assembly if faulty

Parts needed: Circulation pump motor/assembly

🛑 When to Call a Pro:
  • If error persists after basic checks
  • If unusual sounds or leaks are present
  • If internal access or electrical diagnostics are required

Technical Specifications

wattage 30W
component Drain Pump
resistance 50-100 ohms
part_number Beko 1740100300
voltage_rating 230V AC

Common Questions

What does H6 error mean on Beko Dishwasher?

H6 error signifies a circulation pump malfunction, causing the dishwasher to stop mid-cycle and weak water spraying.

Can I fix Beko Dishwasher H6 error myself?

Yes, you can perform basic checks like power cycling the unit and inspecting spray arms and filters for obstructions.

How much does it cost to fix H6 error?

Estimated repair costs range from $80 to $250, depending on part and labor.

When should I call a technician for H6?

Call a technician if the error persists after checks, if you hear unusual sounds, or if you need internal diagnostics.

Sources & References

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!