Beko Dishwasher Error H5

⚡ Quick Answer: The Beko dishwasher H5 error indicates a problem with the drainage system, often due to a faulty water level sensor or pressure switch. This issue can... ✅ DIY Fixable

What Does Error H5 Mean?

The Beko dishwasher H5 error indicates a problem with the drainage system, often due to a faulty water level sensor or pressure switch. This issue can cause the dishwasher to stop mid-cycle and display the H5 code. Possible causes include obstructions in the water inlet or sensing pathway, leading to improper water filling or sensing.

Common Symptoms:

  • Dishwasher stops mid‑cycle
  • Display shows H5 code
  • Possible issues with water filling or sensing water level

Possible Causes

  • Faulty or misreading water level sensor / pressure switch (medium)
  • Obstruction or issue in water inlet or water sensing pathway (low)

How to Fix Error H5

DIY Fix Basic checks for H5 error

  1. Ensure dishwasher is off and cooled down
  2. Check that water supply is properly connected and that inlet valve is open
  3. Inspect and clean filter screens at water inlet to ensure proper flow
  4. Restart dishwasher to see if code clears

Technician Only Diagnose and service water level sensor / pressure switch

  1. Disconnect dishwasher from power
  2. Access internal pressure switch / water level sensor
  3. Test sensor continuity with multimeter and inspect pressure tube for blockages
  4. Replace sensor or pressure switch if faulty

Parts needed: Pressure switch / water level sensor, Associated tubing or connectors

🛑 When to Call a Pro:
  • If error persists after basic checks and restarting the appliance
  • If water appears leaking or flooding
  • If unable to safely access internal components

Next step

Choose the next step for H5

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Pressure Switch

Detects the water level inside the tub and signals when to start or stop filling.

Typical part-only price
$25 - $65
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 30W
component Drain Pump
resistance 10-20 ohms
part_number Beko 1742000100
voltage_rating 240V AC

Common Questions

What does H5 error mean on beko dishwasher?

H5 error indicates a drainage issue, often linked to a faulty water level sensor.

Can I fix beko dishwasher H5 error myself?

Yes, check water connections, ensure the inlet valve is open, and clean filter screens.

How much does it cost to fix H5 error?

Repair costs range from $50 to $150 for parts, depending on the model.

When should I call a technician for H5?

Call a technician if the error persists after basic checks or if there’s leaking.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!