Beko Dishwasher Error H2

⚡ Quick Answer: The Beko dishwasher H2 error indicates a turbidity sensor fault, which detects water clarity during wash cycles. This error can cause the dishwasher t... ✅ DIY Fixable

What Does Error H2 Mean?

The Beko dishwasher H2 error indicates a turbidity sensor fault, which detects water clarity during wash cycles. This error can cause the dishwasher to stop mid-cycle, leading to incomplete washes and unusual sounds from the pump area. Cleaning or inspecting the turbidity sensor may resolve the issue if it is contaminated or malfunctioning.

Common Symptoms:

  • Dishwasher stops mid–cycle and displays H2
  • Possible incomplete wash cycles
  • Dishwasher detects water clarity issues and halts

Possible Causes

  • Turbidity sensor malfunction or contamination (medium)

How to Fix Error H2

DIY Fix Clean and inspect turbidity sensor area

  1. Turn off and unplug the dishwasher before accessing internal components.
  2. Locate the turbidity sensor (often near the base or sump area).
  3. Clean sensor and surrounding area of debris, detergent residue, or mineral deposits.
  4. Run a short diagnostic/test cycle to see if the error clears.

Technician Only Test and replace turbidity sensor if necessary

  1. Verify error and run diagnostic mode according to model-specific instructions.
  2. Test turbidity sensor electrical continuity and signals with a multimeter.
  3. Inspect wiring harness and connectors to the sensor for damage or corrosion.
  4. Replace the turbidity sensor assembly if readings are out of spec or sensor is visibly damaged.
  5. Reassemble and validate operation with a full wash cycle.

Parts needed: Turbidity sensor, Wiring harness/connectors (if damaged)

🛑 When to Call a Pro:
  • If cleaning the sensor area and basic checks do not clear the error.
  • If there is water leakage or signs of internal electrical damage.
  • If the sensor replacement requires access to sealed components that compromise appliance safety.

Technical Specifications

wattage 1800W
component Leakage Sensor
resistance 5-15 ohms
part_number Beko 2822020100
voltage_rating 240V AC

Common Questions

What does H2 error mean on beko dishwasher?

The H2 error indicates a fault with the turbidity sensor, causing the dishwasher to stop mid-cycle.

Can I fix beko dishwasher H2 error myself?

Yes, you can clean the turbidity sensor and surrounding area to attempt a fix.

How much does it cost to fix H2 error?

Repair costs for the H2 error range from ¥5,000 to ¥20,000 for parts only.

When should I call a technician for H2?

Call a technician if cleaning the sensor doesn't work or if there's leakage or electrical damage.

Sources & References

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!