Beko Dishwasher Error E17

⚡ Quick Answer: The Beko dishwasher error code E17 typically indicates an issue with the water inlet valve, preventing the dishwasher from filling with water. This ma... ✅ DIY Fixable

What Does Error E17 Mean?

The Beko dishwasher error code E17 typically indicates an issue with the water inlet valve, preventing the dishwasher from filling with water. This may be accompanied by a flashing display. To resolve the issue, check that the water supply is turned on, ensure the inlet hose is not kinked, and inspect filters and drain hoses for blockages. If the error persists after these checks, further technical inspection may be required.

Possible Causes

  • Water Inlet Valve
  • Kinked Water Supply Hose
  • Faulty Water Supply

How to Fix Error E17

DIY Fix General Troubleshooting Steps for Beko Dishwasher Showing an Unknown Error

  1. Turn the dishwasher off, unplug it, and wait a few minutes before restarting — this can sometimes clear transient errors.
  2. Ensure the water supply to the dishwasher is turned on and the inlet hose is not kinked.
  3. Check the dishwasher filters and drain hose for obvious blockages (even though the specific meaning of E17 is unclear, blockages can cause a variety of errors).
  4. Refer to the specific user manual for your Beko dishwasher model to see if E17 is defined there.

Technician Only Technical Inspection When Beko Dishwasher Shows Unidentified E17 Error

  1. Check the water inlet valve and pressure switch assembly for proper operation — issues in water detection can cause erroneous fault codes on some dishwashers.
  2. Inspect internal sensors (water level, float, pressure) and control board connections for signs of damage, corrosion, or loose wiring.
  3. Use diagnostic mode if available on the specific model to read service codes beyond E17.
  4. Consult Beko technical literature or use manufacturer service tools to get the exact description of E17 for that model.

Parts needed: Water inlet valve, Pressure/water level sensor, Control board and harness

🛑 When to Call a Pro:
  • If the error persists after basic reset and hose/filter checks.
  • If the dishwasher displays error codes again immediately upon power‑up.
  • If there are signs of water leaks, flooding, or unusual noises.

Technical Specifications

wattage 50W
component Water Inlet Valve
resistance 2-5 ohms
part_number Beko 282100012
voltage_rating 220-240V AC

Common Questions

What does E17 error mean on Beko dishwasher?

E17 indicates a problem with the water inlet valve, preventing the dishwasher from filling.

Can I fix Beko dishwasher E17 error myself?

Yes, you can check the water supply, ensure hoses are not kinked, and look for blockages.

How much does it cost to fix E17 error?

Repair costs for the E17 error can range from ¥10,000 to ¥40,000+, depending on parts and labor.

When should I call a technician for E17?

Call a technician if the error persists after basic troubleshooting or if you notice leaks or unusual noises.

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!