Beko Dishwasher Error E14
⚡ Quick Answer: The Beko dishwasher error E14 indicates a malfunction in the flow meter or water intake system. This error typically occurs when the dishwasher fails ... ✅ DIY Fixable
What Does Error E14 Mean?
The Beko dishwasher error E14 indicates a malfunction in the flow meter or water intake system. This error typically occurs when the dishwasher fails to fill with water correctly or experiences erratic filling behavior. The flow measurement system is unable to detect the proper water flow, which may lead to overfilling or stopping the cycle altogether. Common causes include a faulty flow meter, blocked water matrix channels, or wiring issues.
Common Symptoms:
- Dishwasher does not fill correctly
- Dishwasher may overfill or erratically fill
- Cycle stops due to incorrect water intake detection
Possible Causes
- Faulty flow meter or flow sensor within the water intake assembly (medium)
- Blocked or scaled water matrix channels affecting flow measurement (medium)
- Wiring fault or connector issue to flow sensor (medium)
How to Fix Error E14
DIY Fix Basic checks for flow faults
- Turn off and unplug the dishwasher and shut off the water supply.
- Check the water inlet hose for kinks or blockages.
- Ensure the water supply is fully turned on with adequate pressure.
- Run a brief fill cycle to observe if water intake seems normal.
Technician Only Inspect and address the flow meter and water matrix
- Disconnect power and water to the dishwasher.
- Access the water matrix/flow meter assembly (usually behind a side panel).
- Inspect the flow meter, sensor wiring, and connectors for damage or corrosion.
- Clean the water matrix and flow meter channels to remove scale or debris.
- Test continuity and rotation of the flow meter sensor; replace the flow meter or water matrix assembly if faulty.
Parts needed: Flow meter / flow sensor, Water matrix assembly, Potential connectors / wiring harness
- If basic user-level checks do not clear the error
- If there are signs of water leakage or internal flooding
- If wiring inspection or internal component access is beyond user capability
Next step
Choose the next step for E14
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 10W |
|---|---|
| component | Water Inlet Valve |
| resistance | 0-5 ohms |
| part_number | Beko 1741000200 |
| voltage_rating | 220-240V AC |
Common Questions
What does E14 error mean on Beko dishwasher?
E14 error indicates a malfunction in the flow measurement system, causing incorrect water filling.
Can I fix Beko dishwasher E14 error myself?
Yes, you can perform basic checks like inspecting the inlet hose and ensuring water supply pressure.
How much does it cost to fix E14 error?
Repair costs for the E14 error can range from medium to high, depending on parts and labor.
When should I call a technician for E14?
Call a technician if basic checks do not resolve the issue or if there are signs of leakage.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!