Beko Dishwasher Error E13
⚡ Quick Answer: The Beko dishwasher error E13 indicates a water heating issue, often associated with the dishwasher stopping mid-cycle, particularly during the heatin... ✅ DIY Fixable
What Does Error E13 Mean?
The Beko dishwasher error E13 indicates a water heating issue, often associated with the dishwasher stopping mid-cycle, particularly during the heating phase. This may be due to a faulty temperature sensor or heating element, causing the appliance to fail in completing its wash cycle. Users may notice a continuous beeping sound along with flashing display lights when this error occurs.
Common Symptoms:
- Dishwasher stops mid‑cycle and displays E13
- Error appears during or shortly after heating phase
- Dishwasher may not complete wash cycle, possibly due to thermal sensor or heater issues
Possible Causes
- Faulty temperature sensing or heating system (medium)
- Control board / heater relay fault (low)
How to Fix Error E13
DIY Fix Basic checks and reset
- Turn off dishwasher and disconnect power at the wall
- Allow the dishwasher to fully cool
- Wait 10 minutes, then restore power and start a short cycle to see if the error recurs
Technician Only Inspect heating system and temperature sensor
- Disconnect power and access dishwasher heater assembly
- Measure NTC temperature sensor resistance at room temperature and compare against specifications
- Check wiring to heater and sensor for damage or loose connections
- If NTC or heater component is out of specification, replace the part
Parts needed: NTC temperature sensor, Heater element / assembly, Associated wiring harness
- If error persists after reset and obvious external checks
- If internal components show signs of damage (burn marks, melted insulation)
- If you are not comfortable working with live electrical components
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 1800W |
|---|---|
| component | Leakage Sensor |
| resistance | 5-15 ohms |
| part_number | Beko 1741000200 |
| voltage_rating | 230V AC |
Common Questions
What does E13 error mean on beko dishwasher?
E13 indicates a heating issue, often stopping the dishwasher mid-cycle during the heating phase.
Can I fix beko dishwasher E13 error myself?
Yes, perform a basic reset by turning off the dishwasher and restoring power after 10 minutes.
How much does it cost to fix E13 error?
Repair costs typically range from $50 to $200 for parts, plus labor.
When should I call a technician for E13?
Call a technician if the error persists after a reset or if you see damage to internal components.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!