Beko Dishwasher Error E10

⚡ Quick Answer: The Beko dishwasher error E10 signifies a problem with the water inlet valve, commonly preventing the dishwasher from filling with water. Additionally... ✅ DIY Fixable

What Does Error E10 Mean?

The Beko dishwasher error E10 signifies a problem with the water inlet valve, commonly preventing the dishwasher from filling with water. Additionally, it may indicate issues with the internal circulation or drying fan, leading to mid-cycle stops and unsatisfactory drying performance. Addressing these issues promptly can help maintain optimal dishwasher function.

Common Symptoms:

  • Dishwasher stops mid‑cycle and displays E10
  • Drying performance issues or unusual fan/ventilation behavior

Possible Causes

  • Drying fan / ventilation fault (medium)

How to Fix Error E10

DIY Fix Basic checks and reset

  1. Turn the dishwasher completely off at the mains and leave it off for 5–10 minutes to allow a reset.
  2. Ensure the dishwasher door was fully closed and latched before restarting.
  3. Run a short rinse cycle to see if the code reoccurs.

Technician Only Inspect and test internal ventilation/circulation components

  1. Access the internal dishwasher ventilation and circulation fan assembly.
  2. Check for blockages, loose wiring, or failed fan motor.
  3. Test component operation and replace faulty parts if necessary.
  4. Verify control board signals to the fan/ventilation subsystem.

Parts needed: Ventilation/drying fan, Fan motor assembly, Wiring harness/connectors

🛑 When to Call a Pro:
  • If the error persists after basic reset attempts
  • If there are signs of electrical, motor, or ventilation component malfunction
  • If the dishwasher exhibits additional fault codes simultaneously

Next step

Choose the next step for E10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

Typical part-only price
$20 - $120
DIY difficulty
Medium
Estimated time
30-90 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 20W
component Water Inlet Valve
resistance 10-20 ohms
part_number Beko 282000030
voltage_rating 220V AC

Common Questions

What does E10 error mean on Beko dishwasher?

E10 indicates a water inlet valve problem, causing the dishwasher to stop filling.

Can I fix Beko dishwasher E10 error myself?

Yes, perform basic checks like resetting the dishwasher and ensuring the door is closed.

How much does it cost to fix E10 error?

Repair costs for E10 typically range from ¥10,000 to ¥30,000, including parts and labor.

When should I call a technician for E10?

Call a technician if the error persists after resets or if there are signs of component malfunction.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!