Beko Dishwasher Error E08
⚡ Quick Answer: The Beko dishwasher E08 error indicates a malfunction in the drain pump, often resulting in unusual noises during operation or failure to drain water.... ✅ DIY Fixable
What Does Error E08 Mean?
The Beko dishwasher E08 error indicates a malfunction in the drain pump, often resulting in unusual noises during operation or failure to drain water. This error may be linked to low water levels or issues with the water inlet path, affecting water circulation. Users may notice that the dishwasher stops mid-cycle when this error appears, and it could be related to insufficient water detected in the tub or a triggered circulation protection mechanism.
Common Symptoms:
- Dishwasher stops mid‑cycle with E08 displayed
- Possible insufficient water detected in tub or circulation protection triggered
Possible Causes
- Low water level or circulation protection triggered (inlet issues) (medium)
How to Fix Error E08
DIY Fix Check water supply and clean inlet filter
- Turn off power to the dishwasher and close the water tap.
- Ensure kitchen tap supplying the dishwasher has strong water flow.
- Turn off water, disconnect the inlet hose, and clean the mesh filter at the hose and valve inlet.
- Reattach hose and restart the dishwasher to see if code clears.
Technician Only Inspect water inlet path and internal components
- Technician should check the water inlet valve for proper operation and replace if defective.
- Inspect any water softener inlet or internal channels for blockages or mechanical failure.
- Confirm correct water pressure and circulation signals to the control board.
Parts needed: Water inlet valve, Internal inlet filters, Potential water softener/flow path components
- If E08 persists after cleaning inlet filters and checking water supply pressure.
- If internal hoses, inlet valve, or components appear damaged or blocked.
Next step
Choose the next step for E08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 30-50 ohms |
| part_number | Beko 1741000200 |
| voltage_rating | 230V AC |
Common Questions
What does E08 error mean on Beko dishwasher?
The E08 error indicates a malfunction in the drain pump, often due to low water levels or circulation protection.
Can I fix Beko dishwasher E08 error myself?
Yes, you can check the water supply, clean the inlet filter, and ensure strong water flow.
How much does it cost to fix E08 error?
The estimated repair cost ranges from $80 to $250, depending on parts and labor.
When should I call a technician for E08?
Call a technician if the E08 error persists after cleaning the inlet filters or if internal components appear damaged.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!