Whirlpool Dryer Error F3E2

⚡ Quick Answer: F3E2 means whirlpool dryer error F3E2 indicates a malfunctioning temperature sensor, often resulting in inconsistent drying perform... This is typically a DIY fix.

What Does Error F3E2 Mean?

whirlpool dryer error F3E2 indicates a malfunctioning temperature sensor, often resulting in inconsistent drying performance and erratic temperature readings.

Common Causes

  • Temperature Sensor (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Temperature Sensor Connections

    Open the dryer panel and visually inspect the connections to the temperature sensor for any signs of corrosion or loose wires. Tighten or clean connections as necessary.

    Ensure the dryer is unplugged before inspecting.

  2. Step 2: Test the Temperature Sensor

    Using a multimeter, set it to the resistance setting and measure the resistance of the temperature sensor. It should typically read between 10-30 ohms. If the reading is outside this range, the sensor is likely faulty.

    Replace the sensor if the resistance is incorrect.

  3. Step 3: Replace the Temperature Sensor

    If testing confirms a faulty sensor, remove the old sensor by unscrewing it from its mount and disconnecting the wires. Install the new sensor by reversing the process.

    Ensure all connections are secure before reassembling the dryer.

  4. Step 4: Run a Test Cycle

    After replacing the sensor, reassemble the dryer and run a test cycle to ensure the error code no longer appears and that the dryer is heating properly.

    Monitor the drying performance closely.

How to Reset

To reset the F3E2 error code, unplug the dryer for 5 minutes, then plug it back in and run a test cycle to check if the error persists.

Technical Specifications

wattage 5000W
component Temperature Sensor
resistance 10-30 ohms
part_number WPW10150130
voltage_rating 240V AC

Frequently Asked Questions

Can I replace the temperature sensor myself?

Yes, if you have basic tools and follow safety precautions, you can replace the temperature sensor.

How much does a temperature sensor cost?

A replacement temperature sensor typically costs between $20 to $50, depending on the model.

What causes the F3E2 error in my dryer?

The F3E2 error is usually caused by a malfunctioning temperature sensor that fails to provide accurate temperature readings.

Should I call a professional if the error persists?

If the error continues after replacing the sensor, it may indicate a deeper issue, and you should consider calling a professional.

When should I expect to see results after fixing the sensor?

You should see improved drying performance immediately after replacing the faulty sensor and running a test cycle.

User Comments (0)

Share your experience or solution below.

Be the first to comment!