Whirlpool Dryer Error F02

⚡ Quick Answer: The Whirlpool dryer error F02 indicates a keypad or user interface failure, often due to a stuck button on the control panel. This error can prevent t... ✅ DIY Fixable

What Does Error F02 Mean?

The Whirlpool dryer error F02 indicates a keypad or user interface failure, often due to a stuck button on the control panel. This error can prevent the dryer from starting or cause erratic behavior, such as unresponsive buttons. Inspect the control panel for any keys that appear stuck and perform a reset to see if the issue resolves.

Common Symptoms:

  • Dryer displays F02 and may not start a normal cycle
  • Buttons on the control panel appear unresponsive or held down

Possible Causes

  • Stuck or held button on the dryer control panel (medium)

How to Fix Error F02

DIY Fix Perform basic reset and inspect control panel

  1. Unplug the dryer or turn off its circuit breaker for at least 5 minutes to reset the electronics.
  2. Restore power and try a timed dry cycle to see if F02 reappears.
  3. Visually inspect the control panel buttons for any that appear stuck or physically depressed.

Technician Only Inspect and repair control panel and connections

  1. Disconnect power and remove the dryer’s top/front console to access the user interface/control panel.
  2. Check for stuck buttons, damaged switches, or corrosion on the panel.
  3. Verify secure connections at the P5 connector between the console and main control board.
  4. Replace the control panel assembly if defective; if error persists, consider testing/replacing the main control board.

Parts needed: Control panel / user interface assembly, Console wiring harness, Main control board (if needed)

🛑 When to Call a Pro:
  • If the dryer still shows F02 after reset and control panel inspection
  • If buttons appear physically fine but error persists, indicating deeper electronic faults

Technical Specifications

wattage 5000W
component Control Board
resistance N/A
part_number W10812395
voltage_rating 240V AC

Common Questions

What does F02 error mean on whirlpool dryer?

F02 indicates a keypad failure, often due to a stuck button, preventing the dryer from starting.

Can I fix whirlpool dryer F02 error myself?

Yes, you can perform a reset by unplugging the dryer and inspecting the control panel for stuck buttons.

How much does it cost to fix F02 error?

Repair costs are moderate to high, depending on parts and labor needed for control panel or main control board.

When should I call a technician for F02?

Call a technician if the error persists after a reset or if buttons appear fine but the error continues.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!