Whirlpool Dryer Error F01

⚡ Quick Answer: F01 means whirlpool dryer error F01 indicates a control board failure, which may result in the dryer not starting or displaying er... This is typically a DIY fix.

What Does Error F01 Mean?

whirlpool dryer error F01 indicates a control board failure, which may result in the dryer not starting or displaying erratic behavior.

Common Causes

  • Control Board (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Control Board

    Remove the dryer’s top panel and visually inspect the control board for burnt components or loose connections.

    Look for any signs of discoloration or damage.

  2. Step 2: Test Voltage at the Control Board

    Using a multimeter, check for proper voltage at the control board terminals. If voltage is absent, further investigation is needed.

    Ensure the dryer is plugged in during this test.

  3. Step 3: Check Wiring Connections

    Examine all wiring harnesses connected to the control board for any loose or damaged wires.

    Secure any loose connections.

  4. Step 4: Replace the Control Board

    If the control board is faulty, remove it by unscrewing it from the mounting brackets and replace it with a new one.

    Ensure the new board is compatible with your dryer model.

  5. Step 5: Reassemble and Test the Dryer

    Reassemble the dryer and plug it back in. Run a test cycle to ensure the error code has cleared.

    Monitor for any unusual sounds or behaviors.

How to Reset

To reset the whirlpool dryer error F01, unplug the dryer for 1 minute, then plug it back in and attempt to start a cycle.

Technical Specifications

wattage 600W
component Control Board
resistance N/A
part_number W10812395
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the whirlpool dryer error F01 myself?

Yes, if you have basic electrical knowledge and the right tools, you can troubleshoot and replace the control board.

How much does it cost to repair whirlpool dryer error F01?

Repair costs can range from $100 to $300, depending on whether you replace the control board yourself or hire a technician.

What causes the whirlpool dryer error F01?

The error is typically caused by a malfunctioning control board, often due to power surges or component wear.

Should I call a professional for whirlpool dryer error F01?

If you're uncomfortable working with electrical components or if the issue persists after replacing the control board, it's best to call a professional.

When should I consider replacing my whirlpool dryer?

If you frequently encounter error codes like F01 and the repair costs exceed half the price of a new unit, it may be time to replace it.

User Comments (0)

Share your experience or solution below.

Be the first to comment!