Whirlpool Dryer Error F26
⚡ Quick Answer: The Whirlpool dryer error F26 indicates a motor drive or system malfunction, commonly causing the dryer to stop mid-cycle or fail to start. This issue... ✅ DIY Fixable
What Does Error F26 Mean?
The Whirlpool dryer error F26 indicates a motor drive or system malfunction, commonly causing the dryer to stop mid-cycle or fail to start. This issue may prevent the drum from spinning and can be linked to a failure in the motor or its detection. Regular inspections of the motor and electrical components are essential for identifying and resolving the problem.
Common Symptoms:
- Dryer stops functioning or will not start
- Drum may not spin
- Error code F26 displayed consistently
Possible Causes
- Motor drive system failure (motor not functioning or not detected) (medium)
How to Fix Error F26
DIY Fix Restart and basic checks
- Unplug the dryer or turn off its circuit breaker for 5 minutes to perform a power reset.
- Restore power and start a timed dry cycle to check if the error reappears.
- Ensure the dryer door is fully closed and latched before a cycle starts.
Technician Only Inspect motor and related electrical components
- Test the dryer motor for proper operation and continuity.
- Check the drive belt for breakage or slippage.
- Inspect wiring harnesses and connectors between the motor and main control board for looseness or damage.
- Evaluate the control board’s motor output circuitry and replace if defective.
Parts needed: Dryer motor, Drive belt, Wiring harness/connectors, Main control board
- If the F26 error persists after a basic restart and visual checks, call a qualified technician.
- If unusual noises, burning smells, or visible belt/motor damage are present.
Next step
Choose the next step for F26
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drive Belt
Transfers rotational power from the motor to turn the drum or tub.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 20-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Thermistor |
| resistance | 10-15 kOhms |
| part_number | W10779845 |
| voltage_rating | 120V AC |
Common Questions
What does F26 error mean on whirlpool dryer?
It indicates a motor drive malfunction, causing the dryer to stop or not start.
Can I fix whirlpool dryer F26 error myself?
Yes, you can perform basic checks like power resetting and ensuring the door is closed.
How much does it cost to fix F26 error?
Estimated repair costs range from medium to high, especially if the motor or control board needs replacement.
When should I call a technician for F26?
Call a technician if the error persists after basic troubleshooting or if you notice unusual noises or smells.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!