Whirlpool Dryer Error F14

⚡ Quick Answer: F14 means whirlpool dryer error F14 indicates a malfunction in the control board, often resulting in the dryer not starting or dis... This is typically a DIY fix.

What Does Error F14 Mean?

whirlpool dryer error F14 indicates a malfunction in the control board, often resulting in the dryer not starting or displaying erratic behavior.

Common Causes

  • Control Board (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Control Board

    Remove the dryer’s front panel to access the control board. Look for burnt components or visible damage.

    Take a photo of the wiring before disconnecting.

  2. Step 2: Test the Control Board

    Using a multimeter, check for continuity across the control board’s terminals. Replace if readings are inconsistent.

    Ensure the dryer is unplugged during testing.

  3. Step 3: Check Wiring Connections

    Inspect all wiring connected to the control board for loose or damaged connections. Secure or replace as necessary.

    Tighten any loose screws to ensure a good connection.

  4. Step 4: Replace the Control Board

    If the board is faulty, order a replacement and install it by reversing the disassembly steps.

    Make sure to match the part number exactly.

How to Reset

To reset the F14 error, unplug the dryer for 10 minutes, then plug it back in and check for the error code again.

Technical Specifications

wattage N/A
component Control Board
resistance N/A
part_number W10675028
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F14 error myself?

Yes, if you have basic electrical knowledge and tools, you can troubleshoot and replace the control board.

How much does it cost to replace the control board?

Replacement control boards typically range from $100 to $300, depending on the model.

What causes the F14 error in my dryer?

The F14 error is usually caused by a failure in the control board, often due to power surges or component aging.

Should I call a professional for the F14 error?

If you're uncomfortable with electrical repairs or lack the necessary tools, it's best to call a professional.

When should I consider replacing my dryer due to F14 errors?

If the control board fails repeatedly or if the repair costs exceed half the price of a new dryer, consider replacement.

User Comments (0)

Share your experience or solution below.

Be the first to comment!