Whirlpool Dryer Error F09

⚡ Quick Answer: F09 means whirlpool dryer error F09 indicates a malfunction in the control board, often resulting in the dryer not starting or dis... This is typically a DIY fix.

What Does Error F09 Mean?

whirlpool dryer error F09 indicates a malfunction in the control board, often resulting in the dryer not starting or displaying erratic behavior.

Common Causes

  • Control Board (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Control Board

    Open the dryer’s control panel and visually inspect the control board for burnt components or loose connections.

    Look for any signs of damage such as scorch marks.

  2. Step 2: Test Voltage to the Control Board

    Using a multimeter, check the voltage at the control board terminals to ensure it is receiving power.

    Expected voltage should match the dryer’s specifications.

  3. Step 3: Check for Faulty Connections

    Ensure all wiring harnesses are securely connected to the control board and that there are no frayed wires.

    Reconnect any loose wires firmly.

  4. Step 4: Replace the Control Board if Necessary

    If the control board is damaged or not functioning, replace it with a new one following the manufacturer's instructions.

    Ensure the new board is compatible with your dryer model.

  5. Step 5: Reassemble and Test the Dryer

    Reassemble the control panel and plug the dryer back in. Run a test cycle to ensure the error is cleared.

    Observe for any unusual sounds or behaviors.

How to Reset

To reset the F09 error, unplug the dryer for at least 10 minutes, then plug it back in and check if the error persists.

Technical Specifications

wattage N/A
component Control Board
resistance N/A
part_number W10675028
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F09 error myself?

Yes, if you have basic electrical knowledge and the right tools, you can troubleshoot and potentially fix the issue.

How much does it cost to replace the control board?

The cost of a control board can range from $100 to $300, depending on the model and brand.

What causes the F09 error in my dryer?

The F09 error is typically caused by a malfunction in the control board, often due to electrical surges or wear over time.

Should I call a professional for the F09 error?

If you're uncomfortable working with electrical components or if the issue persists after troubleshooting, it's best to call a professional.

When should I consider replacing my dryer due to the F09 error?

If the control board fails repeatedly or if the repair costs exceed half the value of the dryer, it may be time to consider a replacement.

User Comments (0)

Share your experience or solution below.

Be the first to comment!