Whirlpool Dryer Error F08

⚡ Quick Answer: F08 means whirlpool dryer error F08 indicates a control board malfunction, often accompanied by unusual beeping sounds or failure ... This is typically a DIY fix.

What Does Error F08 Mean?

whirlpool dryer error F08 indicates a control board malfunction, often accompanied by unusual beeping sounds or failure to start.

Common Causes

  • Control Board (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Control Board

    Remove the control panel and visually inspect the control board for burnt components or loose connections.

    Look for any discoloration or damaged solder joints.

  2. Step 2: Test the Control Board

    Using a multimeter, check for continuity on the control board connections to ensure they are functioning properly.

    Refer to the wiring diagram for specific testing points.

  3. Step 3: Check Wiring Harness

    Inspect the wiring harness connected to the control board for any signs of wear or damage.

    Ensure all connectors are firmly seated.

  4. Step 4: Replace Control Board if Necessary

    If the control board is faulty, replace it with a new one. Ensure the model matches your dryer specifications.

    Take a photo of the wiring before disconnecting for easier reassembly.

  5. Step 5: Reassemble and Test

    Reassemble the control panel and plug the dryer back in. Run a test cycle to ensure the error is cleared.

    Monitor for any unusual sounds during operation.

How to Reset

To reset the F08 error, unplug the dryer for 10 minutes, then plug it back in and check if the error persists.

Technical Specifications

wattage 1800W
component Control Board
resistance N/A
part_number W10812395
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F08 error myself?

Yes, but it requires some technical skills and tools to diagnose the control board.

How long does it take to repair the F08 error?

The repair can take 1-2 hours depending on your experience and the parts needed.

What causes the F08 error in my dryer?

The F08 error is typically caused by a malfunctioning control board, often due to electrical issues.

Should I replace the control board immediately?

Not necessarily; first, check all connections and test the board before deciding to replace it.

When should I call a professional for the F08 error?

If you're uncomfortable with electrical components or if the problem persists after your attempts to fix it.

User Comments (0)

Share your experience or solution below.

Be the first to comment!