Whirlpool Dryer Error F06

⚡ Quick Answer: F06 means whirlpool dryer error F06 indicates a malfunction in the control board, often resulting in the dryer failing to start or... This is typically a DIY fix.

What Does Error F06 Mean?

whirlpool dryer error F06 indicates a malfunction in the control board, often resulting in the dryer failing to start or operate correctly.

Common Causes

  • Control Board (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Control Board

    Open the dryer’s control panel and visually inspect the control board for burnt components or damaged traces.

    Look for any signs of discoloration or physical damage.

  2. Step 2: Test the Control Board

    Use a multimeter to check for continuity on the control board's connections. Replace if readings are inconsistent.

    Ensure the dryer is unplugged while testing.

  3. Step 3: Check Wiring Connections

    Examine all wiring connections to the control board for looseness or corrosion. Tighten or clean as necessary.

    Corroded connections can lead to intermittent failures.

  4. Step 4: Replace the Control Board

    If the control board is faulty, remove it by unscrewing it from the panel and disconnecting the wiring harness. Install the new board and reassemble the panel.

    Ensure all connections are secure before powering on.

How to Reset

To reset the F06 error, unplug the dryer for at least 5 minutes, then plug it back in and check if the error persists.

Technical Specifications

wattage 500W
component Control Board
resistance N/A
part_number W10810403
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F06 error myself?

Yes, if you have basic electrical knowledge and the right tools, you can troubleshoot and replace the control board.

How long does it take to fix the F06 error?

Typically, it takes about 1-2 hours to diagnose and replace the control board.

What causes the F06 error in my dryer?

The F06 error is usually caused by a malfunctioning control board, which can fail due to electrical surges or component aging.

Should I call a professional for the F06 error?

If you're uncomfortable with electrical repairs or lack the necessary tools, it's best to call a professional.

What happens if I ignore the F06 error?

Ignoring the F06 error can lead to further damage to the dryer, potentially resulting in more costly repairs.

User Comments (0)

Share your experience or solution below.

Be the first to comment!