Sharp Dishwasher Error FE

⚡ Quick Answer: The Sharp dishwasher error code FE indicates a potential water overflow condition. This issue may present itself with unusual sounds from the pump or ... ✅ DIY Fixable

What Does Error FE Mean?

The Sharp dishwasher error code FE indicates a potential water overflow condition. This issue may present itself with unusual sounds from the pump or visible water pooling at the base of the unit. It's important to address this error promptly to avoid further water damage and ensure proper functioning of your dishwasher.

Possible Causes

  • Float Switch Malfunction
  • Clogged Drain Hose
  • Faulty Water Inlet Valve

How to Fix Error FE

DIY Fix Check Your Dishwasher Documentation

  1. Locate the exact model number of your Sharp dishwasher (e.g., SDW6747GS, etc.).
  2. Visit Sharp’s official support page to download the user manual for your specific model.
  3. Search within the manual for all listed error codes and meanings.
  4. If 'FE' is documented, follow the manufacturer-recommended steps in the manual.

DIY Fix Basic Troubleshooting Steps

  1. Power off the dishwasher completely and disconnect it from its power source.
  2. Wait a few minutes, then reconnect and restart the dishwasher to see if the 'FE' code clears (a general reset technique).
  3. Ensure the dishwasher door is fully closed and latched properly.
  4. Check for obvious water issues such as standing water under the base, leaks, or flooding around the unit (common triggers that many dishwashers detect as errors).

Technician Only Inspect Internal Sensors and Water Detection Systems

  1. Open the base panel and inspect for moisture in the base pan or leak detection tray.
  2. Inspect water inlet and drain connections for clogs or incorrect assembly.
  3. Check for sensor failures related to water level or flood detection.
  4. Use diagnostic mode if available on the specific Sharp model to read internal fault registers.

Parts needed: Leak/flood sensor, Float switch, Water inlet valve, Drain pump

🛑 When to Call a Pro:
  • If the error persists after basic reset and visual checks.
  • If you detect water in the base pan or signs of leakage.
  • If you’re unable to access correct error code documentation for your exact model.

Next step

Choose the next step for FE

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Float Switch

Detects the maximum water level to prevent overflow and potential flooding.

Typical part-only price
$15 - $40
DIY difficulty
Easy
Estimated time
10-20 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Water Inlet Valve

Controls the flow of hot and cold water into the appliance.

$25 - $60 · Easy · 15-30 mins

Check fit & price
Possible related component

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

$35 - $80 · Easy · 15-30 mins

Check fit & price
Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does FE error mean on Sharp dishwasher?

FE indicates a water overflow condition, often with unusual pump sounds or water pooling.

Can I fix Sharp dishwasher FE error myself?

Yes, check your documentation, reset the dishwasher, and ensure the door is properly closed.

How much does it cost to fix FE error?

Estimated repair costs range from ¥5,000 to ¥20,000+, depending on parts and diagnostics.

When should I call a technician for FE?

Call a technician if the error persists after resetting, if there's water in the base, or if you can't find the correct documentation.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!