Sharp Dishwasher Error E3
⚡ Quick Answer: The Sharp Dishwasher E3 error code indicates a potential malfunction in the drain pump, which may lead to the dishwasher stopping mid-cycle or failing... ✅ DIY Fixable
What Does Error E3 Mean?
The Sharp Dishwasher E3 error code indicates a potential malfunction in the drain pump, which may lead to the dishwasher stopping mid-cycle or failing to drain water effectively. Users may notice unusual sounds during operation or experience incomplete cycles. It's essential to perform basic checks, such as ensuring the door is securely closed and that the water supply is adequate, before considering professional help.
Common Symptoms:
- Dishwasher stops mid‑cycle or displays error E3 on control panel (general reports)
- Cycle may fail to complete or heat water properly (community appliance guides)
Possible Causes
- Drain Pump Assembly
How to Fix Error E3
DIY Fix Basic dishwasher checks
- Power off and restart the dishwasher to see if error clears.
- Ensure dishwasher door is fully closed and latched.
- Check water supply is turned on and water pressure is adequate.
- Check and clean filters and inlet screens where accessible.
Technician Only Professional diagnostic and repair
- Inspect heating element and related electrical connections for faults.
- Test temperature sensor functionality with proper tools.
- Check control board for error logs or faults.
- Inspect water inlet valve and water level/pressure sensors.
Parts needed: Heating element, Temperature sensor, Control board, Water inlet valve
- Error persists after basic checks
- Signs of electrical faults, burning smell, or repeated failures
- Unusual noises during cycle
Next step
Choose the next step for E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E3 error mean on Sharp Dishwasher?
E3 error indicates a potential malfunction in the drain pump, causing the dishwasher to stop mid-cycle or fail to drain water.
Can I fix Sharp Dishwasher E3 error myself?
Yes, you can try basic checks like restarting the dishwasher, ensuring the door is closed, and checking the water supply.
How much does it cost to fix E3 error?
Repair costs can vary widely, especially if parts like the heating element or temperature sensor need replacement, which may cost several hundred dollars.
When should I call a technician for E3?
Call a technician if the error persists after basic checks, if you notice electrical faults or unusual noises during the cycle.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!