Sharp Dishwasher Error E5
⚡ Quick Answer: The Sharp Dishwasher error E5 indicates a malfunction related to the drain pump, often due to a water level or overflow sensing fault. Symptoms includ... ✅ DIY Fixable
What Does Error E5 Mean?
The Sharp Dishwasher error E5 indicates a malfunction related to the drain pump, often due to a water level or overflow sensing fault. Symptoms include the dishwasher stopping mid-cycle, excess water in the tub, and potential drainage issues. This can be caused by a blocked pressure switch hose, a faulty water level sensor, or an inlet valve that is not closing properly, leading to overfilling.
Common Symptoms:
- Dishwasher stops mid‑cycle with E5 displayed
- Excess water appears in the tub or near the door gasket
- Unit may have water still present at end of cycle
Possible Causes
- Water level / pressure sensor fault or overfill condition (medium)
- Blocked pressure switch hose or debris affecting water level sensing (medium)
- Inlet valve not closing fully leading to excess water entry (low)
How to Fix Error E5
DIY Fix Check and clear excess water / basic checks
- Turn off and unplug the dishwasher to prevent flooding.
- Open the door once it’s safe and remove excess water manually (use sponge/towels).
- Check filters and sump area for debris and clean them.
- Inspect how the unit drains; ensure drain is not blocked.
Technician Only Inspect and service water level sensing and associated components
- Inspect and clean the pressure switch hose and connections to ensure no blockage or kinks.
- Test the water level pressure switch for proper function; replace if defective.
- Check the inlet valve for proper closing; replace if it leaks and contributes to overfill.
- Verify that the control board isn’t falsely triggering water level faults.
Parts needed: Pressure switch, Pressure switch hose, Inlet valve
- If error persists after cleaning drains and inspecting hoses
- If water continues to enter when machine is off indicating inlet valve fault
Next step
Choose the next step for E5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E5 error mean on Sharp Dishwasher?
E5 indicates a malfunction related to the drain pump, usually due to water level sensing issues.
Can I fix Sharp Dishwasher E5 error myself?
Yes, you can clear excess water, check filters, and clean the sump area to address the issue.
How much does it cost to fix E5 error?
Repair costs range from $100 to $300+, depending on whether parts like the pressure switch or inlet valve need replacement.
When should I call a technician for E5?
Call a technician if the error persists after cleaning or if water continues to enter the machine when it is off.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!