Sharp Dishwasher Error E6
⚡ Quick Answer: The Sharp Dishwasher E6 error indicates a malfunction in the turbidity or water quality sensor, affecting the dishwasher's ability to detect clear or ... ✅ DIY Fixable
What Does Error E6 Mean?
The Sharp Dishwasher E6 error indicates a malfunction in the turbidity or water quality sensor, affecting the dishwasher's ability to detect clear or dirty water. This can lead to unusual sounds during operation, failure to initiate a wash cycle, or the machine stopping shortly after filling with water. To address this issue, it's essential to clean the sump and sensor area to eliminate any grease or debris that may obstruct proper functioning.
Common Symptoms:
- Dishwasher displays E6 and may not start a wash cycle or may stop shortly after filling, as reported in multiple independent repair guides. turn
- Error appears related to failure in detecting clear/dirty water, impacting cycle progression. turn
Possible Causes
- Turbidity / water quality sensor malfunction (medium)
How to Fix Error E6
DIY Fix Clean the sump and turbidity sensor area
- Turn off and unplug the dishwasher.
- Remove the lower rack and access the filter and sump area.
- Clean the sump and visible sensor window with a soft cloth to remove grease and food debris.
- Ensure the filter and spray arms are free from blockages.
Technician Only Inspect, test, and replace turbidity sensor if necessary
- Disconnect dishwasher from power.
- Remove access panels to reach the turbidity sensor assembly.
- Inspect wiring and connectors for corrosion or loose connection.
- Test sensor functionality (e.g., multimeter continuity test if applicable).
- Replace the turbidity sensor with correct Sharp compatible part if defective.
Parts needed: Turbidity sensor, Sensor connector/wiring harness
- If cleaning and basic checks do not clear the error.
- If sensor wiring or control board issues are suspected.
- Persistent E6 display after replacement of turbidity sensor.
Next step
Choose the next step for E6
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E6 error mean on Sharp Dishwasher?
E6 error indicates a turbidity sensor malfunction, affecting wash cycle initiation and water detection.
Can I fix Sharp Dishwasher E6 error myself?
Yes, you can clean the sump and turbidity sensor area by turning off the dishwasher and removing debris.
How much does it cost to fix E6 error?
Repair costs range from $60 to $180, depending on the price of the sensor and labor in your area.
When should I call a technician for E6?
Call a technician if cleaning does not resolve the error or if wiring or control board issues are suspected.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!