Sharp Dishwasher Error E2

⚡ Quick Answer: The Sharp Dishwasher E2 error indicates a drainage issue, often resulting in the dishwasher stopping mid-cycle and leaving standing water in the tub. ... ✅ DIY Fixable

What Does Error E2 Mean?

The Sharp Dishwasher E2 error indicates a drainage issue, often resulting in the dishwasher stopping mid-cycle and leaving standing water in the tub. This problem is typically caused by a blocked or clogged drain filter, a kinked or blocked drain hose, or a malfunctioning drain pump. Unusual noises during operation may also accompany this error, signaling a need for immediate attention to restore proper function.

Common Symptoms:

  • Dishwasher stops mid‑cycle with E2 displayed
  • Standing water remaining in the tub at end of cycle
  • Cycle fails to complete due to inability to drain

Possible Causes

  • Blocked or clogged drain filter (medium)
  • Kinked or blocked drain hose (medium)
  • Drain pump malfunction or obstruction (medium)

How to Fix Error E2

DIY Fix Check and clean drain filter

  1. Turn off and disconnect power to the dishwasher.
  2. Open the dishwasher and remove the bottom rack.
  3. Locate the drain filter at the base of the tub and remove it.
  4. Rinse the filter under warm water and clear debris with a soft brush.
  5. Reinstall the filter and run a short cycle to test.

DIY Fix Inspect and correct drain hose

  1. Turn off power and gently pull the dishwasher out if necessary to access the back.
  2. Check the drain hose for kinks, bends, or visible blockages.
  3. Ensure the hose has a proper downward slope to the drain connection.
  4. Clear any visible debris and reposition hose as needed.
  5. Reconnect power and test a drain cycle.

Technician Only Inspect/replace drain pump

  1. Verify power is off and access the dishwasher’s base panel.
  2. Disconnect and test the drain pump for continuity and proper operation.
  3. Remove any obstructions from the pump inlet and impeller area.
  4. If pump is faulty, replace with manufacturer‑specified part.

Parts needed: Drain pump assembly, Gaskets or seals as needed

🛑 When to Call a Pro:
  • If water leakage or flooding is present around or under the dishwasher.
  • If after cleaning filters/hoses the E2 error persists.
  • If internal pump tests show no operation and professional tools/tests are required.

Technical Specifications

wattage 30W
component Drain Pump Assembly
resistance 10-20 ohms
part_number SHARP-DP12345
voltage_rating 120V AC

Common Questions

What does E2 error mean on Sharp Dishwasher?

E2 error indicates a drainage issue, causing the dishwasher to stop mid-cycle and leave standing water.

Can I fix Sharp Dishwasher E2 error myself?

Yes, you can check and clean the drain filter and inspect the drain hose for blockages.

How much does it cost to fix E2 error?

Estimated repair costs range from $60 to $180, including parts and labor.

When should I call a technician for E2?

Call a technician if water leakage is present or if the E2 error persists after cleaning.

Data last verified: 2026-03-18

User Comments (0)

Share your experience or solution below.

Be the first to comment!