Sharp Dishwasher Error F9

⚡ Quick Answer: The Sharp dishwasher error F9 indicates a malfunction in the drain pump, often resulting in unusual noises such as humming or grinding. It may cause t... ⚠️ Difficulty Varies

What Does Error F9 Mean?

The Sharp dishwasher error F9 indicates a malfunction in the drain pump, often resulting in unusual noises such as humming or grinding. It may cause the dishwasher to stop operating, flash lights, or interrupt wash cycles. The primary causes for this error include water supply or drainage faults. Addressing issues with the drain pump, water level sensor, or control board may be necessary for a complete fix.

Common Symptoms:

  • Dishwasher stops operation and displays F9
  • F9 may appear with flashing lights
  • Wash cycle interrupted or fails to start

Possible Causes

  • Water supply or drainage fault (medium)

How to Fix Error F9

DIY Fix Basic Checks and Reset

  1. Turn off and unplug the dishwasher or cut power from the breaker for at least 5–10 minutes.
  2. Ensure the water tap to the dishwasher is fully open.
  3. Check visible inlet and drain hoses for kinks, blockages, or twists.
  4. Clean accessible filters and debris traps in the dishwasher base.

Technician Only Detailed Diagnostics and Repair

  1. Inspect drain pump, pressure/water level sensors, and circulation pump for faults or debris.
  2. Check continuity of water level and pressure sensors with a multimeter.
  3. Verify integrity of control board connectors and re‑seat all internal wiring.
  4. Replace faulty parts such as drain pump or sensors if confirmed defective.

Parts needed: Drain pump, Water level/pressure sensor, Control board connectors

🛑 When to Call a Pro:
  • If the error persists after basic reset and hose/filter checks
  • If water leakage is observed inside or below the appliance
  • If internal electrical diagnostics are required

Technical Specifications

wattage 50W
component Drain Pump
resistance 5-15 ohms
part_number SHARP 214100001
voltage_rating 120V AC

Common Questions

What does F9 error mean on sharp dishwasher?

F9 indicates a drain pump malfunction, causing operation stops and unusual noises.

Can I fix sharp dishwasher F9 error myself?

Yes, you can perform basic checks like resetting the dishwasher and checking hoses.

How much does it cost to fix F9 error?

Repair costs range from ¥10,000 to ¥40,000+, depending on parts and labor.

When should I call a technician for F9?

Call a technician if the error persists after basic checks or if you notice water leakage.

Data last verified: 2026-03-18

User Comments (0)

Share your experience or solution below.

Be the first to comment!