Sharp Dishwasher Error F5
⚡ Quick Answer: The Sharp dishwasher F5 error indicates a malfunction related to the drain pump, commonly resulting in water not fully draining from the unit. Users m... ✅ DIY Fixable
What Does Error F5 Mean?
The Sharp dishwasher F5 error indicates a malfunction related to the drain pump, commonly resulting in water not fully draining from the unit. Users may notice unusual noises during operation or the dishwasher halting mid-cycle. This error often points to drainage issues such as obstructions in the drain hose or filter, or problems with the water level or flow sensor.
Common Symptoms:
- Water not draining fully during or at the end of a cycle (standing water at bottom).
- Dishwasher stops mid‑cycle with F5 displayed.
- Error occurs after a few minutes of operation.
- Pump appears to run but error persists.
Possible Causes
- Drainage obstruction (hose, filter, pump impeller) (medium)
- Faulty water level or flow sensor (medium)
How to Fix Error F5
DIY Fix Check and Clear Drainage Path
- Turn off and unplug the dishwasher.
- Remove and inspect the bottom filter/sump area for debris or obstructions.
- Check the drain hose for kinks, twists, or visible blockages and clear any debris.
- Ensure the drain hose connection to the household drain is unobstructed.
Technician Only Inspect and Service Drain Pump and Sensors
- Pull out the dishwasher and tilt if necessary for access to the drain pump.
- Remove the drain pump to inspect the impeller and internal pathways for blockages or damage.
- Test the water level/flow sensor for proper operation and replace if faulty.
- Verify pump motor continuity and replace the pump assembly if defective.
Parts needed: Drain pump assembly, Water level/flow sensor
- If after cleaning filters, hoses, and checking for visible blockages the F5 persists.
- If internal sensor or pump diagnostics indicate component failure.
- If you are uncomfortable accessing internal components safely.
Next step
Choose the next step for F5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F5 error mean on sharp dishwasher?
F5 error indicates a drain pump malfunction, often leading to water not draining properly.
Can I fix sharp dishwasher F5 error myself?
Yes, you can check and clear the drainage path and inspect filters and hoses.
How much does it cost to fix F5 error?
Repair costs for the F5 error range from ¥8,000 to ¥28,000, depending on the model.
When should I call a technician for F5?
Call a technician if the error persists after cleaning or if you're uncomfortable accessing internal components.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!