Sharp Dishwasher Error E8
⚡ Quick Answer: The Sharp Dishwasher E8 error indicates a potential issue with the circulation pump, likely resulting in poor cleaning performance and improper spray ... ✅ DIY Fixable
What Does Error E8 Mean?
The Sharp Dishwasher E8 error indicates a potential issue with the circulation pump, likely resulting in poor cleaning performance and improper spray arm rotation. Users may notice unusual sounds during the drain cycle and water pooling inside the unit. Addressing this error typically involves inspecting the circulation pump for failure or blockage in the impeller.
Common Symptoms:
- Dishwasher displays E8 and may stop during a wash cycle
- Spray arms may not rotate properly
- Cleaning performance may be poor
Possible Causes
- Circulation pump motor failure (low)
- Blocked or jammed impeller in the circulation pump (low)
How to Fix Error E8
DIY Fix Basic checks before service call
- Turn off and unplug the dishwasher before inspecting.
- Remove and clean filters and check for obvious debris in the sump or wash area.
- Ensure spray arms spin freely and are not obstructed by utensils or debris.
Technician Only Inspect and repair circulation pump assembly
- Disconnect dishwasher from power and water supply.
- Access the circulation pump under the tub (may require laying the unit on its back and removing base panel).
- Test the circulation pump motor for continuity and proper operation.
- Inspect and remove any blockage at the impeller; replace pump motor or related components if faulty.
Parts needed: Circulation pump motor, Pump impeller, Motor capacitor (if fitted)
- If you are not comfortable accessing internal components
- If basic cleaning does not resolve the issue and symptoms persist
- If water leakage, electrical smell, or unusual noises occur
Next step
Choose the next step for E8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 60-120 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Capacitor
Stores electrical energy to assist in starting or running the motor efficiently.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Sharp 2141233 |
| voltage_rating | 120V AC |
Common Questions
What does E8 error mean on Sharp Dishwasher?
E8 error indicates a circulation pump issue, leading to poor cleaning and potential water pooling.
Can I fix Sharp Dishwasher E8 error myself?
Yes, you can perform basic checks like cleaning filters and ensuring spray arms are not obstructed.
How much does it cost to fix E8 error?
The estimated repair cost for the E8 error ranges from 100 to 300 USD, including parts and labor.
When should I call a technician for E8?
Call a technician if basic cleaning doesn’t resolve the issue or if you notice water leakage or unusual noises.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!