Sharp Dishwasher Error E14
⚡ Quick Answer: The Sharp Dishwasher E14 error indicates a flow meter or water intake measurement fault, leading to insufficient water filling or failure to detect pr... ✅ DIY Fixable
What Does Error E14 Mean?
The Sharp Dishwasher E14 error indicates a flow meter or water intake measurement fault, leading to insufficient water filling or failure to detect proper water flow. This issue can cause the dishwasher to stop or fail to start, often accompanied by unusual sounds during operation. To resolve the E14 error, check the water supply and ensure that the inlet hose is not kinked or blocked, and inspect the filters for cleanliness.
Common Symptoms:
- Dishwasher displays E14 on control panel
- Dishwasher fails to fill correctly or only partially fills water
- Wash cycle may stop or not start due to insufficient water intake
Possible Causes
- Faulty or blocked flow meter (water intake measurement sensor) (medium)
- Loose or damaged flow sensor connection (medium)
How to Fix Error E14
DIY Fix Check water supply and intake path
- Ensure the water tap feeding the dishwasher is fully open
- Check that the inlet hose is not kinked, pinched, or blocked
- Inspect basic filters on the water inlet hose if accessible and clean them
Technician Only Inspect and service flow meter and sensor connections
- Disconnect power and water supply to the dishwasher
- Access the flow meter (water intake measurement device) and inspect for blockage or debris
- Verify wiring connections to the flow sensor are secure and undamaged
- Replace faulty flow meter or related sensor components if necessary
Parts needed: Flow meter / water intake sensor, Hose or filter for inlet line
- If inspecting the inlet hose and basic supply does not resolve the error
- If internal flow meter or sensor components show signs of damage
- If water is filling but the dishwasher still triggers E14 error
Next step
Choose the next step for E14
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E14 error mean on Sharp Dishwasher?
E14 indicates a flow meter fault, causing insufficient water filling or failure to detect water flow.
Can I fix Sharp Dishwasher E14 error myself?
Yes, check the water supply, ensure the inlet hose is not blocked, and clean accessible filters.
How much does it cost to fix E14 error?
Repair costs range from $50–$150 for parts, with labor costs separate.
When should I call a technician for E14?
Call a technician if basic checks do not resolve the error or if you notice damage to internal components.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!