Sharp Dishwasher Error E13

⚡ Quick Answer: The Sharp Dishwasher E13 error indicates a potential malfunction related to the drain pump, which may result in unusual noises and failure to drain wa... ✅ DIY Fixable

What Does Error E13 Mean?

The Sharp Dishwasher E13 error indicates a potential malfunction related to the drain pump, which may result in unusual noises and failure to drain water effectively. When this code appears, the dishwasher may stop operating, signaling an issue that requires attention. It is crucial to consult your specific model's user manual for detailed troubleshooting steps.

Common Symptoms:

  • Display shows E13 during or at start of cycle (community report)
  • Dishwasher may stop operation when code appears (community report)

Possible Causes

  • Drain Pump
  • Blocked Drain Hose
  • Faulty Control Board

How to Fix Error E13

DIY Fix Consult Model‑Specific Documentation

  1. Locate your exact Sharp dishwasher model number (e.g., on the side of the door frame).
  2. Download the official user manual from Sharp support site: or
  3. Look up the error code section for that model to confirm the meaning of E13.

DIY Fix Basic Checks When Error Appears

  1. Power off and disconnect the dishwasher from mains.
  2. Ensure the water supply is connected and not unusually hot.
  3. Check for any obvious obstructions or error patterns documented in your manual.

Technician Only Contact Sharp Service Support

  1. Provide the exact model number and context in which E13 appears.
  2. Have technician retrieve model‑specific error code meaning and diagnostic steps.
  3. Perform diagnosis using official Sharp technical resources.
🛑 When to Call a Pro:
  • If the error persists after consulting the model manual.
  • If there are any signs of overheating, unusual smells, or repeated shutdowns.

Next step

Choose the next step for E13

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Drain Hose

Carries waste water from the drain pump to your home's standpipe or sink drain.

$15 - $30 · Easy · 15-30 mins

Check fit & price
Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E13 error mean on Sharp Dishwasher?

E13 indicates a potential malfunction in the drain pump that affects water drainage.

Can I fix Sharp Dishwasher E13 error myself?

Yes, you can perform basic checks and consult your model's manual for troubleshooting.

How much does it cost to fix E13 error?

Repair costs vary by model and region; check with your local service provider for estimates.

When should I call a technician for E13?

Call a technician if the error persists after troubleshooting or if you notice signs of overheating.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!