Sharp Dishwasher Error E11

⚡ Quick Answer: The Sharp Dishwasher E11 error indicates a drainage issue likely caused by a fault in the drying system humidity or temperature sensor. This problem m... ✅ DIY Fixable

What Does Error E11 Mean?

The Sharp Dishwasher E11 error indicates a drainage issue likely caused by a fault in the drying system humidity or temperature sensor. This problem may manifest as the dishwasher displaying the E11 code, a continuous beeping sound, and poor drying performance during or after cycles. Cleaning the vent area and sensor can help alleviate the issue, but persistent errors may require professional inspection and repair of the sensor or vent assembly.

Common Symptoms:

  • Dishwasher displays E11 on control panel
  • Dishwasher cycle may continue but drying performance is affected or cycle may interrupt
  • Possible drying-related issues (poor drying, sensor reading faults)

Possible Causes

  • Faulty drying system humidity/temperature sensor or vent sensor (medium)

How to Fix Error E11

DIY Fix Check and clean vent area and sensor accessible parts

  1. Turn off and unplug the dishwasher
  2. Open the inner door and locate the vent outlet area
  3. Inspect for blockages, grease or debris at the vent and sensor area
  4. Clean gently with a damp, lint‑free cloth
  5. Reconnect power and test if the error clears

Technician Only Inspect and/or replace drying system sensor or vent assembly

  1. Disconnect dishwasher from power
  2. Remove inner door panel to locate drying system humidity/temperature sensor and vent assembly
  3. Inspect wiring connectors for seating and continuity
  4. If sensor is faulty, replace it with genuine Sharp part
  5. Reassemble and test dishwasher operation

Parts needed: Drying system humidity/temperature sensor, Vent assembly, Possible harness connectors if damaged

🛑 When to Call a Pro:
  • If the error persists after cleaning and sensor inspection
  • If internal components are difficult to access or you observe wiring damage

Next step

Choose the next step for E11

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number SHARP DW-PUMP-001
voltage_rating 120V AC

Common Questions

What does E11 error mean on Sharp Dishwasher?

The E11 error represents a drainage issue typically linked to a faulty drying system humidity or temperature sensor.

Can I fix Sharp Dishwasher E11 error myself?

Yes, you can check and clean the vent area and accessible sensors after unplugging the dishwasher.

How much does it cost to fix E11 error?

Repair costs for the E11 error range from $50 to $200 for parts, depending on the model and region.

When should I call a technician for E11?

Call a technician if the error persists after cleaning or if internal components are hard to access.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!