Sharp Dishwasher Error E10

⚡ Quick Answer: The Sharp Dishwasher E10 error indicates a door lock or door switch malfunction. This error often prevents the dishwasher from starting a cycle, as th... ✅ DIY Fixable

What Does Error E10 Mean?

The Sharp Dishwasher E10 error indicates a door lock or door switch malfunction. This error often prevents the dishwasher from starting a cycle, as the machine mistakenly detects that the door is open. You may notice unusual noises and the dishwasher will not drain water properly. To resolve this issue, check the door's closure and latch, ensuring it is fully closed and free of debris. Power cycling the dishwasher may also help reset the system.

Common Symptoms:

  • Dishwasher will not start cycle with E10 displayed
  • Door appears closed but not recognized as closed by control

Possible Causes

  • Door lock or door switch malfunction (medium)

How to Fix Error E10

DIY Fix Check door closure and latch

  1. Ensure dishwasher door is fully closed and latched securely
  2. Inspect door gasket and latch area for obstructions or debris
  3. Open and close the door firmly to ensure proper engagement of latching mechanism

DIY Fix Power cycle the dishwasher

  1. Turn off the dishwasher at the power source or circuit breaker
  2. Wait 1–2 minutes
  3. Restore power and attempt to start a wash cycle again

Technician Only Inspect and test door switch/lock assembly

  1. Disconnect power to the unit
  2. Remove interior/top panel to access door latch and switch assembly
  3. Use a multimeter to test continuity of door switch when door is closed
  4. Replace the door switch or lock mechanism if found defective

Parts needed: Door switch/lock assembly

🛑 When to Call a Pro:
  • If after checking door closure and power cycling, the E10 error persists; if the door latch appears physically broken; if internal diagnostics/testing indicate failure of the door switch/lock

Next step

Choose the next step for E10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Door or Lid Switch

Detects whether the appliance door or lid is safely closed before operation.

Typical part-only price
$15 - $55
DIY difficulty
Medium
Estimated time
20-45 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E10 error mean on Sharp Dishwasher?

E10 error indicates a door lock or switch malfunction, preventing the dishwasher from starting.

Can I fix Sharp Dishwasher E10 error myself?

Yes, check the door closure, inspect for obstructions, and power cycle the dishwasher.

How much does it cost to fix E10 error?

Repair costs for the E10 error typically range from $50 to $200, including parts and labor.

When should I call a technician for E10?

Call a technician if the E10 error persists after checks, or if the door latch appears broken.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!