Samsung Dishwasher Error PC

⚡ Quick Answer: PC means samsung dishwasher error PC indicates a malfunction in the pump assembly, often resulting in unusual noises during opera... This is typically a DIY fix.

What Does Error PC Mean?

samsung dishwasher error PC indicates a malfunction in the pump assembly, often resulting in unusual noises during operation and failure to drain water.

Common Causes

  • Pump Assembly (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Drain Filter

    Remove the lower spray arm and check the drain filter for debris or foreign objects that may block water flow.

    Cleaning the filter can often resolve the issue.

  2. Step 2: Check the Pump Assembly

    Access the pump assembly by removing the cover. Look for any visible damage or blockages in the impeller.

    Ensure the impeller spins freely.

  3. Step 3: Test the Pump Motor

    Using a multimeter, check the resistance of the pump motor. It should read between 10-30 ohms.

    Replace the motor if the reading is outside this range.

  4. Step 4: Reassemble and Test

    Reassemble the dishwasher and restore the water supply. Run a short cycle to test if the error persists.

    Listen for any unusual sounds during the cycle.

How to Reset

The PC error cannot be reset until the underlying issue with the pump assembly is resolved.

Technical Specifications

wattage 50W
component Pump Assembly
resistance 10-30 ohms
part_number DC97-16350A
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the PC error myself?

Yes, if you have basic tools and follow the troubleshooting steps carefully.

How long does it take to repair the pump assembly?

The repair typically takes about 45-60 minutes depending on your experience.

What causes the PC error in my Samsung dishwasher?

The error is usually caused by a malfunction or blockage in the pump assembly.

Should I call a professional if the error persists?

Yes, if the issue continues after following the troubleshooting steps, a professional inspection may be necessary.

When should I consider replacing the pump assembly?

If the pump motor fails the resistance test or shows signs of physical damage, replacement is recommended.

User Comments (0)

Share your experience or solution below.

Be the first to comment!