Samsung Dishwasher Error 5E
⚡ Quick Answer: The Samsung Dishwasher 5E error code indicates a drainage issue, meaning the appliance is unable to properly evacuate water following a wash cycle. Sy... ✅ DIY Fixable
What Does Error 5E Mean?
The Samsung Dishwasher 5E error code indicates a drainage issue, meaning the appliance is unable to properly evacuate water following a wash cycle. Symptoms include water remaining in the tub after the cycle, failed drainage attempts, and possible sounds from the drain pump. Common causes include a clogged drain hose or filter, a defective drain pump, or issues with the water-level sensing mechanism.
Common Symptoms:
- Dishwasher finishes wash cycle but displays 5E before/after drain
- Water remains in dishwasher tub after cycle
- Dishwasher attempts to drain but fails
- Possible audible struggle from drain pump
Possible Causes
- Clogged or obstructed drain hose or filter (high)
- Defective drain pump (medium)
- Faulty water-level or flow sensing mechanism (no water detected by switch) (medium)
How to Fix Error 5E
DIY Fix Check and clear drainage path
- Turn off and unplug the dishwasher.
- Inspect and clean the dishwasher filter and drain area inside the tub.
- Check the drain hose under the sink for kinks, clogs, or obstructions.
- Ensure the drain hose is properly connected and free-flowing to the sink drain or garbage disposal.
DIY Fix Reset dishwasher electronics
- Turn off the dishwasher and unplug from power.
- Wait 10–15 minutes to allow internal electronics to reset.
- Plug back in and restart a short cycle to test if the error clears.
Technician Only Inspect and replace drain pump if necessary
- Disconnect dishwasher from power and water supply.
- Access drain pump assembly per service manual.
- Test pump operation and continuity; replace if defective.
- Reassemble and test with water to ensure proper draining.
Parts needed: Drain pump
- Persistent 5E error after clearing visible clogs and resets
- Drum water remains standing and pump sounds abnormal
- Signs of internal component failure such as burning smell
Next step
Choose the next step for 5E
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 40W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | DC97-16350B |
| voltage_rating | 120V AC |
Common Questions
What does 5E error mean on Samsung Dishwasher?
The 5E error indicates a drainage problem, often with water remaining in the tub after a wash cycle.
Can I fix Samsung Dishwasher 5E error myself?
Yes, you can check for clogs, clean the filter, and reset the dishwasher.
How much does it cost to fix 5E error?
Repair costs range from $60 to $150 for replacing the drain pump, depending on the model.
When should I call a technician for 5E?
Contact a technician if the error persists after clearing clogs or if you hear abnormal sounds from the pump.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!