Samsung Dishwasher Error 6E

⚡ Quick Answer: The Samsung Dishwasher error code 6E indicates a fault with the control panel, often due to a stuck or malfunctioning button. This may manifest as unr... ✅ DIY Fixable

What Does Error 6E Mean?

The Samsung Dishwasher error code 6E indicates a fault with the control panel, often due to a stuck or malfunctioning button. This may manifest as unresponsive buttons or the dishwasher failing to start or continue its cycle. To resolve this issue, check for any visibly stuck buttons and perform a reset by disconnecting the power. If the problem persists, further inspection of the control panel and its connections may be necessary.

Common Symptoms:

  • Dishwasher displays 6E (or bE) on the control panel
  • Buttons not responding or a button appears stuck
  • Dishwasher may refuse to start or stops mid‑cycle until code is cleared

Possible Causes

  • Stuck or malfunctioning button on the control panel (medium)
  • Control panel input or PBA connection moisture/condensation (low)

How to Fix Error 6E

DIY Fix Check and clear stuck buttons

  1. Turn off the dishwasher and disconnect power (unplug or switch off breaker).
  2. Inspect the control panel for any visibly stuck or pressed buttons.
  3. Press each button individually to free any that may be stuck.
  4. Restore power and test to see if code clears and normal operations resume.

Technician Only Inspect and service control panel assembly

  1. Disconnect power and remove inner door panel to access the control panel and PBA.
  2. Inspect button switches, ribbon cable and PBA connector for damage or corrosion.
  3. Clean any moisture or corrosion on connectors, and test button switch continuity.
  4. Replace control panel assembly or PBA if faulty switches or damage are confirmed.

Parts needed: Control panel / PBA assembly, Button switches / membrane, Connector cables

🛑 When to Call a Pro:
  • If the error persists after basic button inspection and reset.
  • If control panel assembly, wiring, or electronics show damage or corrosion requiring professional repair or replacement.

Technical Specifications

wattage 60W
component Drain Pump Assembly
resistance 10-30 ohms
part_number DC97-16930A
voltage_rating 120V AC

Common Questions

What does 6E error mean on Samsung Dishwasher?

The 6E error indicates a control panel fault, often from a stuck button, preventing the dishwasher from operating properly.

Can I fix Samsung Dishwasher 6E error myself?

Yes, you can check and clear stuck buttons by inspecting the control panel and resetting the power.

How much does it cost to fix 6E error?

The estimated repair cost for a Samsung Dishwasher 6E error ranges from $100 to $300, depending on parts and labor.

When should I call a technician for 6E?

Call a technician if the error persists after checking buttons or if there's visible damage to the control panel or wiring.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!