Samsung Dishwasher Error 1E

⚡ Quick Answer: 1E means Samsung Dishwasher error 1E indicates a malfunction in the water level sensor, often accompanied by unusual beeping soun... This is typically a DIY fix.

What Does Error 1E Mean?

Samsung Dishwasher error 1E indicates a malfunction in the water level sensor, often accompanied by unusual beeping sounds and the display showing the error code.

Common Causes

  • Water Level Sensor (50% likelihood)
  • Wiring Issues (30% likelihood)
  • Control Board Failure (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Water Level Sensor

    Locate the water level sensor, typically found near the bottom of the dishwasher. Check for debris or blockages that may affect its operation.

    Ensure the sensor is clean and free from any obstructions.

  2. Step 2: Test the Sensor with a Multimeter

    Disconnect the sensor's wiring harness and use a multimeter to check for continuity. If there is no continuity, the sensor is likely faulty and needs replacement.

    Refer to the service manual for specific resistance values.

  3. Step 3: Examine Wiring Connections

    Inspect the wiring leading to the water level sensor for any signs of damage or loose connections. Repair or replace any damaged wires.

    Secure all connections to ensure proper communication.

  4. Step 4: Check the Control Board

    If the sensor and wiring are intact, inspect the control board for any visible signs of damage or burnt components. If necessary, consult a technician for further diagnosis.

    A faulty control board may require professional replacement.

  5. Step 5: Reassemble and Test the Dishwasher

    After completing repairs, reassemble the dishwasher and turn on the water supply. Run a short cycle to check if the error code persists.

    Monitor for any unusual sounds or behavior during the cycle.

How to Reset

To reset the error code, press and hold the Start/Cancel button for 3 seconds. This may clear the error if the underlying issue has been resolved.

Technical Specifications

wattage N/A
component Water Level Sensor
resistance 5-10 ohms
part_number DC97-16938A
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the Samsung Dishwasher error 1E myself?

Yes, if you have basic tools and follow the troubleshooting steps carefully.

How long does it take to resolve the 1E error?

Typically, it takes about 45-60 minutes to diagnose and fix the issue.

What causes the Samsung Dishwasher error 1E?

This error is usually caused by a malfunctioning water level sensor or wiring issues.

Should I call a professional for error 1E?

If you're uncomfortable with electrical components or if the control board is faulty, it's best to consult a professional.

When should I consider replacing the water level sensor?

If testing shows no continuity and cleaning does not resolve the issue, replacement is necessary.

User Comments (0)

Share your experience or solution below.

Be the first to comment!